Viewing all customer Discussions for:

Other

I have PGT windows and in one window the cord that attaches to the pulleys and spring broke. The channel balance is 37 inches long without the end guides. 36-3-EKS-CMC-6 is written on the side of the channel balance

Product ID 5500. S.O. 18394926.1 CCL#440-H-046.03 its a lock for my door.

The mortise needs replacement.

No names or numbers. Window base 2 3/4" x 1" deep w 5/8" lock diameter, receiver 5/16" deep x2 3/4" long,

need this clip for the window

Hi Swisco, Please let me know if you have this part to a glass shower door

I'm in search of both a right and left-hand (2) replacement cranks for two of our casement windows. I see where the part number S-1081-66 shows up in some of your posts but I don't see where anyone has confirmed that the part(s) you recommend did the job. Can you tell who the window manufacturer ... (cont.)

Help with balances Marked 2640 BSI op what replacement part do I use? I need a couple sets +, and is there a way to increase the weight strength a single step? Thank you! -DAT

Need help to identify a channel balancer. The metal part measured with length 31.7" The stamp shows 31DS 38 B.S.I PH Thanks, Simon

Drawer Guide REISSS MANUFACTURING COMPANY N Y C R 26 .PATENT: 2857233 DIMENSIONS OF GUIDE PATH : WIDTH 3/4 INCH DEPTH 1/4 INCH

This sash guide in the pictures has deformed and broke. The guide is screwed with a single screw into the top of the channels on both sides of our single hung windows (only the bottom window goes up and down) and this sash guide holds the window balance in place at the top of the moving window. Th ... (cont.)

this is a crank for shutters need the inside gear.

Tilt window latch

It looks like it says 932 on the one that is broken. It appears to be all one piece when I took the one out that wasn't brokenThe coil is 1/2 inch

I'm looking for a replacement mechanism, can you help?Please let me know.ThanksDave

Looking for right part number to replace balances . Metal channel measures 30". Thanks

Looking to replace these failing hanging drawer guide holders.

Hello. We have a customer with a late 1980s/early 1990s Kolbe & Kolbe double casement window unit that is in need of a new operator and some locking mechanism parts. Other than the finish, the unit is in great shape, and the because of the location it would be extremely difficult to replace with ... (cont.)

This is 1-1/4"Wide x 1-1/2"Tall x 1/2" thick. The spring is stamped F8. The window weighs 16lbs. Is it available, or what would the replacement be? Is it parts, or is there a whole assembly? This was a Patriot Double hung Type "VSDH" Code "GVW-K-1" Thank you, Dwight

Bureau is old. Size of handles varies 2.5 inches across to 3.5 mid-hole to mid-hole. thank you for any information or suggestions