Viewing all customer Discussions for:

Other

Hello, I am a daycare director and we have Duraseal windows. We are in need of replacement parts of the attached image. Could you point me in the direction of how I may order these?

25 yr. old storm Larson door. numbers on were Reg#02681121u and 221010718

Do you have a replacement for this old storm window glazing gasket

My part matches your measurements from your piece in the website. Could you please let me know if your part it would work. A number in the short arm is 31876 and the long arm is 41011. Thanks Jorge

Dimensions are 1 7/8" width - 3.2/8" length - 2 1/2" TDC from screw to screw

I don't see any markings or numbers on the window or track or hardware. I saw some similar items on your site, but they don't seem to be deep enough. I also don't know how many pounds it would need to be capable of handling. Help please! (I acknowledge not having measurements is not particularly hel ... (cont.)

Hello - Not sure this is one of yours since the parts on your site look a bit different. But can you identify a pair in your inventory I can replace these with? The bathroom window is about 20 pounds. Thanks!

# ON PIVOT 796ON CHANNEL BALANCE 26 5 CW. CMC. 9width 1 1/4"thick. 1/2 "high. 1 3/4"

Screen door roller has MBC 1102 stamped on it.

We need 2 operators, plus 1 hinge for Milgard windows, the operators are 5" in length

truth casement operator # on arm 31230A, and 31229. 10" x 7 3/4" x 5 1/4"

Window was Installed in 1998Unknown part number

Hello, I would like to order two window balances. Window slides Up and down only. (No tilt) Metal length measures 26 inches, width 11/16 inch (approximately) Metal length with plastic ends measures 27 1/8 inch Channel has rolled pressed edge ( see pictures) Has the following markings printed on i ... (cont.)

not sure of the name, please let me know if you needed anymore information. Will need about 10.

Simonton Sliding/Tilting widows Double Coil Spring for top Window

Hi, my patio lock handle (inside handle) is broken. The lock itself is fine, including the handle on the outside. Is it possible to just get a replacement handle? I'm not sure what brand my lock is. The door itself is 1 3/4" thick. Thanks very much. Bev

Having a problem with replacing broken pivot lock shoes on my 24 year old Sears Weatherbeater Double Hung windows. The shoe is shown in image A49990A4-C9AF-4EB and there are two photos showing the lift coil in place within the window frame. The shoe is approx. 19/32" in diameter and 17/32" thick. No ... (cont.)

Hello, I have cabinets stamped with Quality Cabinets in the drawers that are about 12 years old. I have a broken slide/bracket support. It is label Right or Left on it. I'm looking for both the RH and LH side if possible. Thanks

The piece of metal that connects the window to the frame broke off in the hole so I need both parts. Any ideas.

Aluminum sliding Door is from early 80's. Need to replace both of the wheels or rollers. I have more pictures if needed.