Viewing all customer Discussions for:

Other

I wanted to replace this brass sliding glass door handle with one that has a lock and key. Do you have one that will fit this and replace this part with one that will has a lock and key from the outside?Thanks,Chris

Hello, Am trying to identify a replacement window crank. Photos are attached. The height from centerline of bottom screw-hole to top screw-hole is 5-1/4". The width from left screw hole on bottom to right screw-hole on bottom is 1-1/8". Can you help me identify a replacement part? Sam ... (cont.)

Hi, i am looking to purchase caldwell replacement part to a pair of 28 inch window balancer with identification imprinted as 27 4 IR Caldwell. I am attaching pictures and hope you can help me identify the replacement parts. Let me know how i can purchase these from you. Thanks!

The pictured bottom window tilt slide has broken on several of my windows Making it impossible to tilt inward. I need 8 of them so my Uniframe Windows can once again be fully functional.

This is a missing part of the shoe cabinet snd it comes also with a plastic screw that fits in it. I want the pair for this.

I need like ten of these items. My contractor needs these items as I'm closing on my home asap. Thank you.

Hi, looking to replace plastic brackets (4" long, right side) and rails (18" x1") Both upper and lower drawers.

Only thing I know about this window is it has stamped numbers on it. MARVIN-01-IGCC CBA 88 The window crank assembly is broken and I can't find a replacement part to fix it. Any help is greatly appreciated.

need 2 PGT Window Channel balancers. Number on balancer is 29 5 FX CMC 7. Also require right hand Top Sash Guide

Seal for bottom of 3/8" glass door; seal on outside of door is 3/4"; seal on inside of door is 5/8". Have been unable to find anything with seals that measure as long as this. Can you help?

Part is 2 3/4 by 1 7/8 by 1 1/8 to 3/16 and the roller is 1 1/2 in diameter. I am wanting to replace assembly and I need to make sure what to order. Thank you.

I need to order (2) window channel balances. The length is 32". The ID # on the channel is 32 4 FW. Please advise which part I should order.

I have 4 aluminum double hung windows and all of them will not stay open. I think it is the spring that has failed. I cannot find the manufacture as these are older windows.so I am not sure of the exact part needed but I would like your opinion. Please let me know if you need pics and I will go o ... (cont.)

Looking for the part number for this awning window operator to order. Thank you.

I am looking for the replacement weather stripping for all of my windows and sliding door. I believe they are Manufactured by Acorn. The weatherstrip has a plastic center piece. Are all same size?

I have Norco hardware for casement window. Part might be 18012. Need parts.

This is an entry door threshold weather stripping that slides or pushed into the bottom of door with the two upright inserts. Inserts set 1 inch apart. Bottom plate to the bulb is 1 1/2 inches, bulb is on inside edge.

I need to replace two channel balance on double pane, single slider, vinyl windows. The channel balance are stamped "20 4 HS CALDWELL". The photos show the underside and both sides of one end part (front and back). I'll send two other photos showing the other end part (front and back). Do you carr ... (cont.)

For window

Looking for a replacement interior handle for our Vetter patio door. Age is about 16 years. Color is sandstone. Thanks!