Viewing all customer Discussions for:

Other

Looking for replacement lock and keeper. Will part 90-042 and 90-041 work?Thank you

Drawers/Slides at least 32 years old. The slide "cradles" the drawer on the bottom side and underneath.

Need to replace slide pull out for 2 bin trash cabinet . Part says 4WCTM-162DEQ. Need to replace both sides .

I am looking for 6 ea of the 3230 window channels for my vinyl windows. I would like them with the ends on them. I have attached a photo of the parts.

Patriot window, believe 600 series. What is p/n for complete latch? What is p/n for just the raised push tab?

This holds a bar the pushes the lock for a long casement window

I beleve this is a Del Mar F4161. It has 1-1/8 wheels. Two of these as soon as posible. Thanks Steve

Broken tilt part

I need to replace these two balances. They have "a 2740" stamped on them. The metal part is exactly 28 inches and 1/2" channel.

only thing on stop is #7 PAT Pending

Need replacement latch for Alcoa 2040 casement window installed about 35 years ago.

I believe its a window tilt latch but I cant find a part that has a round dowl looking part on the top in that section. It goes on a horizontal sliding window at the top left.

Hi, I can't identify the manufacturer of my windows. The house was build in 1966 and they're either original or were replaced before 1995 when we bought it. The pins attach on the side with the screw holes 1 1/2 inches apart. It's L-shaped with part sliding under the bottom of the window. Thanks in ... (cont.)

pella between door blinds sticky string pull. It is what the string that controls rolling the inside blinds up and down. Small plastic piece that sticks to window.

Small short chanel guide that the window travels on to pull out so half the window frame can travel to the left an open. House built in 1993. Company was in Brighton MI but out of business. The two corners in the images are broken.

I am looking for 2 pair of the jamb liners shown in the photos. The existing liners are 3 3/8 wide and 66 inches tall. These are for double hung 30 glass/wood sashes. These are also non tilt-in style windows. The existing liners are held in place by 4 metal clips.

Brass/Copper window lock. Two hole.

Hi. Would you please enlighten me with the name of this part that is supposed to hold my window open ? Do you carry it ? How much ? Thank you

Simonton windows roughly 12 years old. Need to replace coil/shoe apparatus

Window measure 33 5/8 x 32 1/8 weight=25.2lbs Channel block 9/16" stamped 28 5 BSI PV Channel measures 28 9/16"