Viewing all customer Discussions for:

Other

the two parts pictured in the photo are from two different bi-fold doors from different customers of mine. Do you have theses?David

FRAME WIDTH = 11/16 FRAME LENGTH = 3-1/8 FRAME HEIGHT = 1-1/32 WHEEL DIAM = 1-1/4

Hi Swisco, I was hoping these were right but I am not sure... There aren't any dims on the website besides the length which is right and the ribbed metal channel's width is 9/16", but is considered 1/2" in the trade...... The balancer we need to replace is a 28TG it also has a PM stamped in it. The ... (cont.)

Need bottom seal for DH7 Soft-Lite Windows.

Dear Swisco, I am looking for a replacement lock for an Aluminart/Chamberdoor storm Please let me know if this is available and price, and if I can purchase only the replacement lock without the handles?

I am still looking for a replacement part for my mirrored closet doors. A Swisco representative thought perhaps part 23-222C might be a match. Unfortunately, there's no way to attach that part to my mirror door. Basically, what I need are the replacement wheels at the top. Are those available? If ... (cont.)

Per the recommendation from Swisco I am preparing to order the S795 balance spring to replace the balance spring on my Plygem window. Prior to doing so I need one more piece of information. The current balance spring attaches at the top of the window via a hook into a hole in the window. (see att ... (cont.)

I am looking for a crank mechanism for my Vetter windows. There are no hinges on the window just the crank mechanism the bottom and a piece at the top of the window that I would need as well. I understand that this company is no longer in business so I was hoping that someone knew what Tyrone of re ... (cont.)

Can you identify the replacement for this part?

Aloha,I am trying to find window crank and housing parts for the window listed above. (1992)I will need about 30 of them.Cranks broken from aging.Thank you. (Mahalo)Dr. Seulyn

I have a broken window guide, and I cannot seem to find it on your site. Can you please confirm you have this part or a replacement?

Hello I am looking for this track I have put in 2 photos 1 length is 59 inches the track width is 2 3/4 with slide opening for closet metal doors. My name is Anthony..pictures of what is needed provided in this post exactly the same way 2 needed of tracks.

Attached are pictures of the vinyl bead glazing for Quaker aluminum single hung single strength glass built around 1987. We have nearly 500 of these windows. Thank you greatly for your help.Russ

cam only broken

Mechanism in window 5 inches wide, cover 5 1\4, crank handle 4 1\2 inches long according to how you measure from end of shaft to tip, and 2 inches high mid shaft to bottom of handle. Also shown mechanism on opposite side intact. Label on mechanism manufacturer name Truth.

Thank you

Stamped 28B USB. Metal channel is 29". Outside channel depth is 9/16", channel opening width is 1/2".

Hello, I am looking for the pivot bars to match this one. Also, the vinyl where these attach is cracked on most of the windows, so the bars will wiggle when going up and will most likely break soon. If there is a longer bar that has a hole that will match the 3rd hole, or just further back where I c ... (cont.)

It's has a stamp on it saying Truth. Crank was put in our house in 1993.

is your wrench for Pella windows