Viewing all customer Discussions for:

Other

Simonton windows, coil info: 5232208, # 4.0, 35" P

Please see picture. Is there a part(s) that can replace this? I'm looking for quantity 6.

Part for an old jealousy/awning window

Discussion number D56963 , How do I find the part for the attached shower door rollers, King ANSIZ971-1984. Do I actually need to drill into my glass? I don't know why, but the installation guide, step 8 says drill a new hole. And that new hole is 7/8" away. (7/8" away from what?) ... (cont.)

Looking for replacement hinges USIP Hinges. The measurements are 1-1/2 to 1-9/16 from the center of hole on the hanger part to the center of the furthest hole for the door side. Sorry I don't have any photos

what I can see is : u 8 28c or u B 28c the channel is 29 inch length 9/16 width (1/2 inch).I don't know what the different options you have in your website.Please,help me find the correct one.Thanks!! JUAN Torres

Part is broken. It has a spring on the inside that holds a piece in the channel

The part holds one end of a slide assembly for a kitchen drawer. On its back: "U.S. PAT. NO. 3,090,662" Beneath that: "PATENTED 1965 CAN." Beneath that is the single digit "6".

I need a pivot shoe that is made by ply gem. It is "T" shaped. Any chance you would carry those. As it sits in the channel it is an upside down "T". It is 1 1/4" wide and 1 7/8" tall

I need a right and left Anderson balance....the only identity marks are C 6 23 373. The holes toward the center of the balance is where screws hold the balance in place. The house was built in the early 1970's. The glass pane is approx. 32x15 both top and bottom windows.Thanks in advance for an ... (cont.)

Hi, I need replacement pins for some old Slimfold Model E closet doors (see pictures). I think I'm supposed to have three retractable and one stationary, right? I sent pics of one of the two doors. What do you think? Thanks!

Here is the number on the original channel balence: 17-3 FA2 CMC 9. It is 18 inches long. We can't tell whether we need 385 or 380. Thanks

Good morning I placed an order in order 25 of these T lock balance shoes which I thought were the correct ones. After trying to install them I realized the ones I had ordered from you guys are just a Tadd bit thicker than the ones that came out of my windows. I have provided the pictures and the ... (cont.)

Per your request here is the picture of the broken handle. The screws are less than 4 inches. Let me know if you need additional information

my casement win actuator has broken Number on arms are -30744 and 20810 is that part avil--if yes do i just order direct from you?

no names or markings on screen door or hardware most likely original parts plastic wheels broken unable to locate part..screen door itself in good condition Thanks in advance for your help.

Hope you can help me with this part there is a number 2320

Hi, I was wondering if you could help me with the proper replacement part. I will likely need 2 of them- please email me contact info for payment if you have it. Thanks!

The sash balance I need is same design as your Series 850 Block and Tackle Rod Balance. Issue is your replacement units are not the same length 28 1/2 inches that I need. Do you carry anything that can be used to replace these?No marking except for patent number on one of the plastic pieces 5.737.87 ... (cont.)

17 inches long metal part. 3/8 deep channel. Stamped in says 16a