Viewing all customer Discussions for:

Other

Please help me identify the part that's in the picture. I think it's the coil balance shoe. The bottom is cracked and the black slotted round part fell out. I need to replace that part and if you have instructions on how to fit the window back in would be very helpful. Thank you! ... (cont.)

I want to change the balancers cannot find any markings to identify I have weighed the windows and measured the balancer by the sleeve cover length 3/8 by 29 and 1/2 I do have several others sizes and lengths and wait

looking for the door sweep

I can't find this door handle anywhere can you help me please?

I have two exterior doors that need new weather stripping (sides and bottom). The kerfs on the sides and top are 1/4" wide. No weather stripping I can find locally are any where near 1/4" thick. The current bottom seal is 1-3/4" wide with kerfs that are 1-1/8" apart. The only bottom weatherstri ... (cont.)

I need a new shower sweep with drip rail. The measurement is 17 inches wide. The shower door is 18 years old & the sweep is tearing now. I can't get the rubber out so a new one is in order. Can you help. Thank you

The only marking on this door says "ESD Fairfield OH". I think it is a Pella that was sold by Home Depot. I need a new bottom seal/gasket. Door is 37 1/2" wide.

Hi, I can measure this exactly if needed. Do you think you can identify it based on these pictures? Thank you Sergiu

I was having trouble getting a window open. They had painted the exterior and many of them are painted shut. I am going to attach three pictures from a window. I was able to get open. I don't know if the symbol a means Anderson window or something else on the first photo. The hand crank measures 4 ... (cont.)

I have a 2 inch long pivot bar with a pilot hole on the top at 1 5/8 " The width of the pivot bar is 1/4 inch. The height of the pivot bar is 3/16 of an inch. I am looking for several of these can you help me?

Need weather stripping for old Craftline casement windows. Probably manufactured in the 90s.

Hello! I amLooking for replacements for this older PGT hardware. Any assistance would be greatly appreciated!

Would you know these parts? Window is about 20 years old and purchased at Home depot. Thanks, Dave

I have been replacing channel balances with you Swisco products and that has been working out well. I have found a couple of pivot shoes broken and will habe to replace. The outside dimensions are 1.25"W x 2.25"H x 0.50" thick. The blue pivot is 1/2" in diameter and the slot goes to the edge as you ... (cont.)

Will this fit the Pella door?

1973 condo building. Do you have any replacement for those guides? Thank you!

Need replacement pocket door rollers.

When I slide my drawers to close, the drawer doesn't slide all the way back. I've looked at a number of things and can't seem to find the problem. I'm thinking this isn't only happening to me. To solve the issue. I push down on the drawer as I close it. As if to go o we something in the back of th ... (cont.)

There is a #7 embossed on the coil.

Hi, I'm replacing the spiral balances in my windows. They weigh 20 pounds and the tube length is 30 inch and they are tilt. What model number balance would you recommend? Thank you. Matt