Viewing all customer Discussions for:

Other

I need to order a 14 inch center drawer mount and also the piece at the end as shown in the picture

I bought 32-081 from you and on the side that faces the drawer its solid on the piece that on the drawer it has a slot for the metal guide to go into the guide

Is this replaceable? What kind of part is needed?

Hi, I'm trying to identify replacement parts for 12 block & tackle channel balances for non tilt single hung windows. They are 9/16" wide, 28" long (not including the plastic tips), stamped 2740, and were installed on Next Dimension vinyl windows (I think the brand name is Windsor). Happy to pro ... (cont.)

The clip on the window is no longer in groove on sill, which makes it feel like the entire casement window is going to fall off. I suspect I need a kit for both window and sill parts?

3.5 inches between screw holes. Thank you.

I am looking for 2 window crank mechanisms for my Milgard casement windows built in 2000.Can you help me out?Bob

I need to replace qty. 2, block & tackle assemblies, complete and ready to install. Channel Length = 30, Width = 1/2". Stamped on the bottom of the channel is: 2930 CA in the vertical and in the horizontal small stamping B S T. Any support will be appreciated.

Need 2 balancers 30" - see pictures attached Mark 40/50 SH FIN H-LC35* 120x77 (mull)

See photo. Do we need to replace with same size and specs? We plan to replace the pair. There are 8 windows that need replacement channels.

Looking for a replacement for this piece at the top of the window sash which retains/pulls down the counterbalance. Window info is on the image attached. Is this a product available on your website?

Measured the metal to be 32" and 35" but I wasn't sure about the option.

It's marked as U B 27C. It's 28" long.

Searching for sash clip; very simple looking... like a miniature piece of channel (dimensions in photos). Opposite side rusted and broke off. Did not see in your selection, but I may have overlooked it. Thanks!

Thought I had the right roller from Home Depot but didn't see the original roller has a notch cut out of the front on top. Otherwise this part looks exactly correct. Maybe you can cross reference. Lastly the sticker is from the screen glass door giving a model number. Can you match the old roller in ... (cont.)

Hi - I'm trying to replace the Milgard Tuscany (SmartTouch one-touch operation) sliding glass door handle with a handle that uses a key to open. I've tried 2-3 different products and none of them work. Will this Product Code: 82-081 work for my door? Thank you!

hi I could really use help identifying this lock and keeper 2 1/4 from screw placement to screw replacement thank you

nontilt window spring. sez caldwell 28 4 LN on channel.. metal channel is 29 inches long and 9/16 (your "1/2") wide. Need 6 for 3 windows.

Hi, Do you have any replacements for this? Thank you!

I have identified the manufacturer as swisco but am not sure how to find a replacement part or a substitute system, it's likely 20+ years old.