Viewing all customer Discussions for:

Other

What's a post? The crank has one hole at the top and two at the bottom. From top to bottom the distance is 5.25" measuring from center of hole to center of hole. The distance between the two bottom holes is 1 1/8". The armature screw is i/4" long (just the threaded part) and 3/16" thick. I sent a ... (cont.)

#58-002 what is the number to it if it is 5/16 wide and the pile is 3/16 can't seen to find it

I sent two photos one of the part broken and the second of it to i identify the part.

The window is not secure to the frame. I think the retaining clips are not holding. Also can not find the correct replacement operator to wind out the window for replacement.

Is there a way to locate the roller part number without taking the door off? All I can find is the glass information.

I'm trying to repair a window. It's missing the set of internal window tilt latches. Information about the window. It's a vinyl tilt window with the following label on the underside of the sliding part: 33 3/4x53 1/4 8501-3 20295043*1*2*1 2 30 3/8*26 5/16 Argon The opening for the internal tilt ... (cont.)

Hi I have shower doors but I cannot locate the parts used to secure the bottom of doors. I had them removed because they were a hazard for my 92 year old mom who passed. Please help me locate the parts I need. Thanks! Zilla

Your video said to contact you for guidance with a round hole instead of a square one. Thanks

Looking for these lower sliding window plastic glides with no rollers. Also the upper plastic guides. Thank you.

Length on each leg is 1 3/8" Width slightly less than 1/4" No number on part or frame. Can you get theses parts for me?

As you can see in the pictures the height is 3/8. The curved part is 5/8. And the width of it is 5/8. Which one do I need

Approx length 2 3/8". Several are broken. Need replacements for night latches.

Numbers on the glass are 31-98.6 can you tell me which crank I need?

The Arma that ataches to the window is aprox 4 and 3/8s

I have an Anderson crank out window and the above hook slides in so that I can lock the window, the hook is missing. Do you sell these?

Channel length is 20 5/8Stamp print is 2040Pella window - I believe the windows were installed between 2007 to 2009I need a total of 4 Thank you,Art

Can you replace this? Mary Ann

I'm looking for this type of replacement latch. My windows are 21 yrs old new when house built. I do not know the brand of the window. Can you suggest a part that will work?

I need a replacement 165 degree hinge (probably). This is for a corner cabinet with two doors. The hinge connecting the doors is fine. This is to connect it to the cabinet. It says Mepla. The holes in the cabinet are 1.25 iniches apart and 1.25 ices from the edge of cabinet. On the door, I have ... (cont.)

Need top and bottom inside track tension pieces. Certain teed. metal coil has the number 408 on it. Need 2 sets of top and bottom plastic pieces and metal coil tension please.