Viewing all customer Discussions for:

Other

I bought the 90-180 sweep lock and the 90-183 keeper. But the sweep lock stands too high and won't engage the keeper like my old lock. It sits too high. Do you have anything with a lower profile? One of your customer service agents thought I should look at the 90-009 but that looks so different. ... (cont.)

Good morning!I have Pella Windows from 1993 when the house was built. There are several handles that do not work(mechanism broken) and latches that do not lock the window properly.Below is a picture of some of the windows. Do you have the part?If you need any measurements let me know or if there is ... (cont.)

I need to find the right replacement for the patio door handle attached photos. My existing handle set is about 5 7/8 inches from screw hole to screw hole.

Hello!I have 13 right and 2 left operators I would like to replace in a home in southwest Florida. The patent number D 198202 was found embossed in the metal cover. Could you please identify these parts for me so I may completely replace all?Thanks for your support,Wayne.

We are looking for both the right and left of this Andersen casement operator. 11" arm.

Hello I need help finding the right screen window corners to replace some broken ones on 24 year old Certainteed windows. I have 3 pics of the broken original window screen corner and also 2 pics of the screen frame to see if that is even something I can also get as one side buckled removing the scr ... (cont.)

I need to replace the handles and lock system of our storm door which seems to be from Sugarcreek Industries. Unfortunately I do not have the series or model number of the storm door itself. The door itself is about 20 years old. The style is Mortise and the lock system has 2 dead bolts. It is al ... (cont.)

Like to purchase five of these units that have broken in our sliding doors - extra locking device on right side of sliding patio doorsRon

Hello-A hinge on a cabinet installed 32 years old has failed. Mepla hinge. Cabinet part code 611.243.01.92. Round door piece bears two codes: plastic collar 697.043.59.00 and 698.243.59.00 indicated as Made in Austria. Photos below. Might you stock a suitable replacement? Given the age of the hinges ... (cont.)

1.Channel Length is 25 11/16 inch 2.Stamp 25 5 3.The window weight is 26 lb

Hi! Looking for a replacement for this cover or both. Window crank hardware is labeled Truth and it could be 20 years old.

I need the code number for this kind of pocket filler trim

Measures 26" metal to metal as per your video description. Window weighs 17.7lbs.

Peachtree casement window crank handle.

Second type.Aloha,Josh

Hello,I'm looking for help on identifying replacment hardware on 10-12 doors. Look like 2 separate sets of hardware. Some of the doors have the Anderson logo on them and the others I cannot find any identifying info. The owner said they thought the doors were 30yrs old.Second set of photos to follow ... (cont.)

Hello, Windows by Flesher. Latches are 2-3/4" long, screw holes are 1-13/16" apart. Please let me know if you need additional info. Thank you, Michael

Greetings Swisco: I need to verify what parts I need. Here's what I do know. -The Weight of one window with glass is 25.5 pounds. -The locking terminal is BLACK-- is it model 15-197? The length of the channel balance is 31-inches long-- is it model 751? Two locking terminals are broken, but I want ... (cont.)

I'm undecided which replacement I need. The certainTeed 15-192 matches measurements but the configuration is different in minor ways. The only text I find is"China". There is one coil balance per side.

I need two balances like this ones can you tell me which ones I should get?