Viewing all customer Discussions for:

Other

The brass bushing failed and I need you're guidance in repairing the awning operator.

The balance is 1/2" wide and 26 4/8" long. Can I get the same parts?

Hi, I need 7/8" x 7/8" x 5/16" with a pull ring. I can do without the pull ring if necessary, but I can't seem to find this size anywhere. This part appears to be the same as Screen Corner Latch with Pull, 7/8" x 5/16" Product Code: 95-218, but I don't need the locking pin. Looking for about 50 e ... (cont.)

Hi could you identify the replacement for the pivot bar pictured in photos. It may be from Certaiteed or Simonton. has 2 numbers stamped, o3 on bottom, 11 on top; 2 holes, 2-5/8" long. The pivot housing is original, see picture (metal, slightly oval. Thanks, Don

Looking for the piece pictured that attaches to the bottom of the sash where the pivot bar protrudes. Also not sure if there's supposed to be a pivot case that goes inside the sash. Thanks again always for your assistance.

We have an older mobile home and one of the sliding closet doors has damaged roller pieces. Door is in great shape... but has to have new rollers. Can you help us choose the correct ones? One is upper. One is lower. Thanks!

I need the snap=in glazing trim for an awning window. The house was built in 1957. The originl trin is aluminum. Do you have anything that I can use? I have attached pictures of the trim from 4 sides. I wwould need approximately 9 feet.....

I have 2 casement windows that I need to replace the hardware as the gear mechanisms have failed and they do not crank open or closed.

I'm looking to replace the hardware and lock can you help

My handles have come off and the gears are spinning out when trying to close. I will actually need a few of these. Also wondering if you guys have screen assemblies? There are a couple windows that do not even have the frames thank you for your help.

I need this part. The other one the black plastic guide is broken

black plastic piece broke, 40960 CAV 1. Part of locking devise for casement window SERIES Mira NAMI CERTIFICATION PROGRAM ACCREDITED BY ???? Case ment NFRC AMERICAN NATIONAL STANDARDS INSTITUTE CPD PWG - M-93-00392-00001 100/200

Apologies, I don't know my terminology. I have French doors and the levered hinge that moves the pin into place, locking one panel in place, is missing. The photo of the item on another door is attached as well as where it is missing. The missing part is ~11" long. I believe the doors are Cascade bu ... (cont.)

HI, I need to replace the spindle gear for a casement window (see picture above). Thanks

I took a picture of the nameplate in the window panes, the spring balance did not have any identifying marks

Pivot lock shoe from double hung window. Attaches to spring with a nylon cord

I'm looking for a tilt latch to replace one of my windows. It looks like I need a pair of slide-in internal tilt latches, but I'm not completely sure / unsure of which one I need.

I'm looking for a part that apparently you don't have so here's a couple of pix. The part is labeled as this. Truth Casement Window Straight Arm Operator 40056. Right position. Thanks for your help!

Apparently we didn't check for the functionality of one of the basement windows after taking possession of brand new house and after 3 years we discovered these part are broken.

Length of metal part is 21"