Viewing all customer Discussions for:

Other

I believe that these are Ellison Series 200 single hung windows manufactured in 2003. The pivot mechanism for the sash is broken. I am trying to find a replacement part. Thanks, Rob

The Length is 30" The ID number is 29-11-DM5 CMC I need two of them and the end caps on the windows I have included a picture of these as well. These windows are PTG windows not sure when they were made but it was close to 2015

Hello, looking for this piece. It hooks into the window sashes to keep window from falling down.

I have a patio door it was install in 1992 the weatherseal has to be replace. Can i use 58-181 Pella Push-in Bulb Weatherseal?

These are pictures my contractor sent me. He doesn't know the manufacturer of the door. Can you tell? What parts would I need to replace the existing hardware?

Hello,we are looking for the attached parts.please advice on availability and pricing?Thank you,Leonardo

I need three replacement cranks for Weatherseal windows. One is for a smaller window, picture attached. The length of the crank is 10 inches for each of the two legs I need two cranks for a larger window, picture attached. The length of the legs are 5 inches d=for the cross piece na d4.5 inches for ... (cont.)

27" metal end to end

Trying to find a match for this window seal trim

Weighed window and can i use the 140 quick tilt balancers to replace the dual spring balancers? Also need sash vent latches left and right believe they are 26-362, tilt latches land right believe they are truth hardware because of being rounded 46.20.32.002? And need 2 balancers for upper window 14. ... (cont.)

What is the stem piece that inserts into the pivot lock shoe attached to the balance?

I am having trouble finding the correct bolts. Can you help me, please.

We're headed to Romania June 1 on a mission trip. The disabled adult home we'll be working with needs repairs to their windows which came from the states. The director provided the attached photos but not much else. The windows don't tilt. They 36 long ones and 17 short ones. Is it possible to ident ... (cont.)

Can you please help me to identify the correct glazing bead for my Alcan windows installed in the late 80's? These appear to be snap in and photos are attached. Thank you!

Hello,Wondering if you can help with this. I would like 4 new balances and the little plastic connector. Let me know if you can help. Thanks, Eric

Need to replace the locking latch on my Champion door in my 3 season room.

This door has four latches to secure the door shut and locked.

Looking for non tilting channel balances. Width 1/2 inch Length 33 Stamp ID # 5 LW CMC 11

Do you carry a replacement for the channel balance shown in the pictures attached? I'm a contractor myself, but these are for our home in Florida.

Roller will not stay in tack due to broken wheel. This is part of adjustable height screw that is connected to door. It looks like a black plastic piece is needed to allow the height adjustment and that piece looks to be broken.