Viewing all customer Discussions for:

Other

I believe I have Plygem windows. The boot that keeps the window on the balance is broken on both sides. The window will not stay up. I don't know if I need the whole balance or not? The stamp on the balance says 25C

This is a Vetter patio sliding door. This is the small weatherstrip that goes on the interior portion of the frame, and when the door is closed it provides the seal.

Truth 08/17/17 10:17 B

Hi, The hardware we bought does not match this door. I need the interior & exterior escutcheon plates that will fit the screw holes (7 1/2" from top to bottom) and the interior thumb-turn lock and exterior keyed lock. the Secury multi-lock #s are pictured but I also include a pic of the other si ... (cont.)

The arm measurement is 2 5/16 and the screw hole is 3/16 threaded The distance from top to bottom hole on center is 5 1/4 Distance between bottom 2 holes on center is 1 1/8

Need help finding some window parts for tilt windows

Do you carry a replacement for this roller ?

Tie bar is 34.9" long x 1/2" wide. Bottom roller is 7/8" from bottom edge. Top roller is 3 3/4" from top edge. I have included photos with measurements. I also need 4 tie bar clips. I have included a photo of that as well. I couldn't find an exact match, so I am assuming that they have changed the d ... (cont.)

morning,27 year old Lincoln double hung window. I believe it is called a load carrier clip. It is attached to spring loaded string. See pictures.Thank you Marty

I have more photos if needed

I have several Alcoa windows that I would like to repair and replace the weatherstripping. All of them are Alcoa, but they are different sizes. I want your help figuring out what I need to repair the windows. The main problems are that the balances are broken or jammed, and we cannot open windows or ... (cont.)

This one of the top piece is in pieces so you only have about 1/2 of it. I would be replacing both of these. they retain the top of the spring to the window. The one on the clip for the side and guide of the window is intact and would take 4 of them to lock in the window. Do not know the brand b ... (cont.)

I have bought a Jeld Wen replacement door handle twice: Premium Vinyl Patio Door Interior Handle (Left Hand) Replacement Kit 0740-LWH. The thumb lock keeps breaking. Do you have a replacement part that is made of stronger material?

Resending request with photos.I have a failed channel balance on a Pella single hung window. I need the channel balance and metal pieces that connect to the side of the window. I have 3 windows and should replace all 6 channel balances given this one failed.The measurement of the metal section is ... (cont.)

This silver metal clasp goes on the outside of wooden window frames of our 1967 built home. It is held on by that flathead screw and allows the windows which have hand pulled inside openers that are attached to two sliding pieces that form a V to be opened and not fall down off the frame. We have ... (cont.)

C-6202-19 is the number on the latch. I need 7 of these with covers. I returned my order recently that was incorrect. Cheers, Scott

The roller is from the corner of a sliding mirror closet door. The roller is concave. The one shown has one side broken off. The device provides support for the corner of the door and holds it together. The horizontal part of the L slides into a groove in the top of the door and the short vertic ... (cont.)

I'm hoping you can help me I was given your contact information from Gail at Jeld Wen and she suggested I reach out to you regarding some replacement weather stripping I am looking to purchase. I have attached a sketch of the 2 window sash and frame Weatherstipping I am looking to replace along ... (cont.)

Screw hole openings are 2 3/8 " and not the 1 1/2 " shown in your catalog. Else they are identical in every respect . I'm having difficulty sourcing these The plastic wedges are broken in many existing window units and need to be replaced

Hello Swisco, Thank you for your response and for your insight. As this is the first time I am replacing parts for a screen I did not purchase, I'm a little 'green' about the measurements and such. I want to give you a bit more information with both photos (see attached) and a brief description o ... (cont.)