Viewing all customer Discussions for:

Other

Good morning - my customer has the subject door in a 72"x 80" double door style. I need to replace all of the weather stripping including the bottom sweeps. Do you carry those parts?

I need a replacement piece for a kitchen drawer. A plastic piece broke off. Having looked at your sight, i see that someone also seems to have the exact same piece my drawers have. You mentioned to the customer that this piece is no longer made. Would youhave a replacement thst would fit mine. I do ... (cont.)

Hello looking for PGT impact window support 2007 Single hung

series9980/9980P double hung windowone of the balance pully springs were missing when I bought this older home.The windows will be getting replaced eventually, but we would like to be able to keep the window open in case of emergency exit, and currently the window channel will not allowIs there a re ... (cont.)

Good Afternoon, I have a customer with a Sash patio door lock that needs to be replaced. Sash is now permanently closed and my google search directed me to your company

Need replacement pieces for the glazing

Looking for replacement part - Marking on old spring is 25 4

Want to know the make and model and if it is still made. Need to replace the mechanism

Hello, I just bought / received a S765-33 option 32-3 from you. I guess I ordered the wrong part. Looking closer at options it looks like i may need a different model.See pics attached as this is the connector on my old one and the S765 didnt have this.Thanks Tom

I need to replace a Mepla side rail tsliding track support for a pullout shelf that is installed in a Kraftmade cabinet in my kitchen. It has a serial number or product number printed on the backside of 600.010.08.25. The number is visible in one of the pictures located above I have checked many ... (cont.)

Good afternoon. Please see attached pictures for balance size and tilt in brackets for identification for replacement. Weigh of sash about 28.2 lb

I need 1 replacement crank handle for a Hurd casement window, installed in 2000. This handle pushes onto the splined shaft of the operator, and has a spring clip to hold it on--no set screw. In the end view, you can see the splines and the spring fitting into the slot. In the slide view, you can ... (cont.)

Need to know what to order to replace 17 4 Caldwell CM

28" long metal channel. these are for blomberg single hung 48" wide by 58"h metal window sash that i think weighs 30-40lbs - they seem to fail easily - should i go up in weight lift?

I am looking for a replacement part number to order?

The length is 27" The width is 1/2"

25 5/8 " long 2 balances needed, 25 2

I need some parts for my 20-year-old windows from an unknown manufacturers. The lower pane has latches at each side on top. They are plastic and 2.5" long with a sliding tab which hold the top of the window from tilting in.The pictures aren't great but hopefully will help.Louis

I need to replace at least the covers of these balancers, which have degraded and crumbled from UV exposure. I think the coils themselves as well as the coil shoes are still good, but I'm happy to replace those as well if that makes more sense.

Hope this enough information. I have 43 pieces of window glaze that goes around typical window as shown. They are a little over 13" high and 9+" wide. I did not count the vertical/horizontal runs. I am looking to identify the plastic glaze and the amount I should order. This is my second reques ... (cont.)