Viewing all customer Discussions for:

Other

A guest broke one of these latches. It looks similar to 90-009, but has a hook to catch the adjoining door. Do you have anything similar? The holes are 2-1/4" OC.

I am looking for a complete lockset replacement for an older Larson storm door circa year 2000. It would be great if it used a Kwikset key. Do you have such a replacement?

I need 2 replacement balances like the ones pictured or something that will substitute. From what I understand they were discontinued.Thanks for any help you can offer. Feel free to call or email me if you need any more information. Thanks, Bryan

We are missing the handle on one of the drawers. It's Pennsylvania House furniture.

Line MP24374 Marvin Window Low Profile Casement Window Sash Lock left Hand

The windows in our facility have the coil balance on the side in the sash instead of on the actual window. The window is not double hung so what do you have in the way of this kind of coil balance?

Brocken latch

Looking for these parts andersen windows.also on glass it says Cig-11-00.7 in rh lower corner.i need 1 rh and 1 lh

i am looking for top pivot pin for what i believe to be lehigh brand bifold doors the pin is 5/16 x 5 1/4 long and it has a 1/16 hole for a hitch pin 3 3/16 from the end

My door NAMI-302187 MAKE DATE - 9/26/2018 WARRANTY - 34089454 THE lock will not work. Can you please advise the correct part to replace with

I am trying to refurnish my Pan Am awning windows (single pane). Windows where installed in 1989 I need to replace the alum glazing bead (the exposed side is about 3/4"). Also, I am having trouble getting the glazing bead out of the window. It does not snap in and out easily. I am including a dr ... (cont.)

I have several very heavy 2004 era PGT Winguard Windows, vinyl, single hung, tilt-in sash, with hurricane impact glass. They have one 3/8" and one 9/16" spiral balance on each side. The tube length is 33" on all of them. There is no tip remaining of the 3/8" balancers except for maybe some yellowi ... (cont.)

All hinge parts.not crank mechanisms. American Craftsman. Need 5left hand and 5right hand.

I need the size attached. Is this something you have available? 23-031 did not work.

This house is about 45 years old. I didn't find any numbers or markings on door parts. It has wooden framing on the inside and metal on the outside. The door handle screws are 4" apart, door width 1 5/8", opening in door is 6 1/8", there are 5 screws on assembly inside door. Receiving locking as ... (cont.)

I'm Looking for replacement Hinges. Original brand Mepla. The first 2 photos are of a working hinge. The next photos show a broken hinge with the Mepla name. A couple of these Hinges broke. Maybe poor metal. Some of the screws broke also in the hard-wood. I've got better screws now. I'd like to r ... (cont.)

I am missing the cog that goes in this Delaney escutcheon lockset. The cog acts to retract the latch when the thumb latch is pushed down on the outside of the door. (It has a door knob on the interior side of the door.) Is there anything I can buy to fix this without buying a whole new lockset? ... (cont.)

I am looking o find a replacement part. I cannot locate part number or name on this part. Do you have anything similar?

I have all the parts only the inside and outside handles. 5 1/2 inch center - the part that is loose is the outside handle and that smaller scre- I tighten but then it loosens. Any suggestions or replacement? Not very handy, but can follow directions or buy something new.

Need a set of tilt latchesMeasurements. 3.5 x1 .25