Viewing all customer Discussions for:

Other

Looking for Door Sweep with Kerf. Measurements are 35 3/4 inch long, 1 3/4 inch wide and Kerf center measurements 1 5/8.

This is a 39 year-old rear mount for a drawer slide. It's in a kitchen cabinet and is broken. I can't find this part anywhere. Any help would be appreciated.

Both right side and the left side of the interior sliding doors have broken off around the screw heads. Sash controls in ferndale, MI is listed as manufacturer. We need to replace them. These appear to be identical to the handle sets originally installed

Need 2 rollers with hardware

Hello. I need to replace the springs on my windows. A local handyman ordered parts from you and I went to try to fix my windows and the parts that he ordered are too skinny. They are not the same size as what I already have in my windows. Can you help?Kelley

Hi, I need to replace several spiral balances in my 23-year-old windows. Non-tilting, vertical single hung. The sash weight is 17 lbs. The attached photo shows the business end with no visible color insert. The balance is 3/8" diameter and 30 inches long. Thanks

Looking for a replacement for the 29 inch lenght - 10/16 inch width channel balance for non-tilt window Length:29 inches Width: 10/16 inch Markings: 28 3 DW CMC 10

Plastic clip on window for channel balance, I ordered the balancers from you guys a couple of months ago and didn't realize these were broken. My order number was 1913419. Not sure if this helps, but these clips are for those balancers. Thanks;Justin

The captain would like to get a few of them. Plates only.

The sliding door lock set in the photo dose not works needs to be replaced , would like to know what part is that and order it .

Both balances are broken, one the spring has broken and the other the top attachment. The metal sheath is 27 inches and the metal stamping reads 26-5

One of them say AMS 6795 One is for the right window and another picture is for the left. We're looking to replace both.

I'm trying to find a replacement for WENCO casement window weatherstripping shown in the photo. These are early 1990's windows (maybe JX7 model). The dimensions are appproximately 1/4x1/2 in. Bob

I have 12 ribbed channel balance that I can't find on your website. It's 34 B stamped and has a hook on the top and at bottom. If you are able to custom fabricated, I would appreciate it. Let me know if you need anything more to help. Tilt in, 1/2" width and 34" long / I think closed cam. The one ... (cont.)

I have been trying to replace this handle. The screw holes are both broken.

I need several channel Balances. I do not see any with the hook type like I have. Would you be able to help me figure out what part I will need. The only number stamped are "26B BS1". I have 11 windows needing repaired. Thank you for your help!

Hi, I need help in finding replacements for the attached photo of coil parts for two windows. Both windows have broken balance and will not stay open. Thanks, Jessica

I need help getting replacement parts

I need to find a replacement roller for my sunroom patio door thanks