Viewing all customer Discussions for:

Other

Jeld wen vynil sliding window latch cover (1"x1/2") for G704-00306-5024

Please see attached photo. Part is from sliding screen door from unidentified mfr, but used with Sunview French door unit. Appreciate ANY help in finding this- Thx!

Looking for this window tilt lock not sure what the window brand is

I have Pella windows in my house with fold away cranks. The right window crank handle is stripped and falls off the base. Do you sell replacement handles for a right window? It is brown.Suzanne

Hi , I'm looking to find replacement screen corners like the ones in the picture. They have little tabs that you can flip out to hold the screen in place and flip in to remove the screen. The screen is mounted inside the house, do you have anything that might replace these? Thanks! ... (cont.)

These are 21 inches and I would need to if you could let me know if you have them and quote me the price!measurements for shoes15/161 1/161/2Thank you,Jon

Inside the picture of the old lock, where there are some circles, on the right side is the #2 & on the left side are the following: 1 2 3 4 5 6 7 8 9 X Y Z The dimensions are as follows: Outside egg shaped handle: 6 inches Inside handle (White) 4 3/8 inches There are 5 holes on the door frame it ... (cont.)

I have an house that at some point added storm/screen inserts that were manufactured by Mon-Ray out of Hopkins, MN. They work well but I have some were the locking/sliding mechanism (uses a peg that slides) have failed and so the storm can not be raised. My handyman suggested that you may have rep ... (cont.)

I have 7 windows with dual strips approximately 2 feet tall and they are passing wind thru in the winter. Theyre marked LP in the corner of the glass, i dont know if thats a brand. Ive included some photos to see if you can help me buy the right weather stripping.

Please look into this part and send me the part no. w=1.25 l=1-7/8' and thickness= 1/2"

Hello, I hope you can see the picture good enough. We need 2 of these. Please contact me as to how to pay, It says truth 9ddoop on this unit. thanks Dennis

Hello. Please lead me to this crank out operators. Thank you.

Hi, You guys are awesome. I order all of the time. Could you please help me identify this Anderson balance? Thank you.

Single hung tilt latches.Top plate 2-3/8" long

Please help me replace my balancers for milgard 2'x3' bathroom window. Length of metal chanel = 13.75" Stamp # 13 2 I need 2 balancers

Looking for covers and cranks for this window. Can't find any part numbers on it but the brand is Truth and pat. No. 4,840,075. Made in USA. Prefer a foldable crank.

Looking for Vetter slider weatherstripping around the door jam inside. 2-79 1/2 inches for the side and 2-69 inches for the top.

42 1/4 length locking bar and the lever is 3 5/16 long X 11/16 wide

I am looking for the vinyl window part shown in the attached pictures. The only markings I see is the letter "E". Thank you.

Hello- Please help! Home built in 1961. 4-200-RH only identifier.