Viewing all customer Discussions for:

Weatherization

I have 10 yr. old Anderson windows that I need the "wiskered rub-strips " for. The rub strip is "H" shaped with plastic on the bottom that slides into a channel and the wiskers on top. The plastic that slides in the channel is .190" wide, the wiskers are slightly wider. The height is 1/4 in. tota ... (cont.)

Bought a roll of 9/32 x 1/8 (58-004). To wide and I can't tell which depth makes tight fit with 1/8 to skimpy. I see to possibile choices..58-158 or 58-050. Any Advice

I need window strips to replace on some windows that are size 36x40 they have cracked from heat and cold, I hope you have them

I would like to replace the white wool weatherstrips attached to my vinyl double hung windows. The appear to be 1/4'' high with a groove to fit in 2/16'' to 3/16'' wide Weatherstrip seals the top of the lower sash against the bottom of the upper sash.

Hello, I recently ordered vinyl glazing from your company (part # 55-180). Do you recommend the corners being cut at a 45 degree angle and is any caulking necessary after installation? Thank you, Bill

I am looking for some snap in glazing for a garden window. My style closely resembles 55-120 and is a dark brown. My dimensions are 1/2, 3/16, 11/16. Your dimensions are 3/8, 3/16, 13/16. The glass is 1/2 inch thick. Thanks for any help you can provide.

I need to replace seal on almost all of my windows. They are about 20-25 years old. Brand unknown, but great thermopane wood casement windows. I believe product #58-053 will be the correct replacement although my existing are more of a grayish brown. The groove that the seal fits into appears to be ... (cont.)

Do you have a match for the bubble weatherstripping in the channel on the bottom of my Marvin window? Attached is a drawing with "approximate" measurements and a photo. thanks.

I need to know what kind of windows these came off of to replace the weather strip. Do you have this type of ws. The wider tan strip is off the frame and the smaller brown strip is off of the sash. Thanks, Sean

I have a client who has a 1984 wooden single slider window that needs replacement weather stripping. These also act as glides. They are are a U shaped design with acute corners not rounded. Do you have a part for this?

Trying to find a replacement for this snap in glazing. It is off a windshield from a Mid 80's Formula Boat. The windshield was produced by Water Bonett. outside demension is aprox 5/8". inside deminsion (the one with the tang) is 1/2" Please help

Hello, I am replacing the mesh and weather stripping of aluminum patio door screens. They are quite old- I assume 1958, so I have hard time locating parts for them. Do you have Wool Pile 1/4" pile height and the backing is square in section- 1/8" by 1/8". On the top of each screen there ar ... (cont.)

(1) See attached photos for the particular vinyl bead I need. I need to replace sash bread on several windows on the south side of my home; UV rays have made the existing bead (12 years old) brittle and cracked. The windows are "ALENCO" but that company is out of business. SO I need to know specifi ... (cont.)

Will you please tell me the correct way to identify the correct size spline I need? The channel the spline fits into on my screens is, .125. Do I need to order the .120 spline? Any help in this matter would be greatly appreciated.

Hi my name is jeff. we have anderson windows and im fixing the screens and as i take them apart they are held in by 1/4in aluminum and they are arching when they come out.i have tryed the home depot and there stock only goes to .175 and its not thick enought i just dont no how to hind the correct si ... (cont.)

I am looking to weather strip my old Stanley Awning windows - they are probably from the mid to late 60's. I know the windows aren't energy efficient, but I can't afford now windows for the entire house so would like to make them as efficient as possible til then. The weather stripping is old, har ... (cont.)

Hi, I have a house that was built in 1986, and the glazing splines are all brittle and falling off. Do you have something that would fit these windows? I'm attaching pictures. The grip part of the spline is 5/16ths, and the showing part of the spline is 1/2inch, though I don't care if you have a ... (cont.)

I am looking for replacement weatherstripping for my kitchen casement windows. They were installed in 1995 when the house was built. I bought in 201. I believe they were built by a local company. I haven't seen anything that matches the profile exactly. They need replaced as they have lost some of t ... (cont.)

replaced today what we removed was hollow bulb (and it was falling apart) never thought about replacing it but this seemed to work even better. Im assuming its pretty mush the same but gives better seal on my 1987 double hung vinyl window

I have Marvin casement windows that need some new weatherstripping. It looks like 58-055 is similar to what is on them except mine has what I call grip lines on the bottom of the bubble. Your opinion?