Viewing all customer Discussions for:

39-089 Window Dyad Crank, 5"

Needs to be replaced. Handle turns, but window doesn't move.

I have two windows that are aprox 25 years old. The window crank housing has broken off of both. I have attached pictures of both. I need to replace both of them.

can't find Truth casement split arm operator right hand in white, with 3 hole base, that has operator arm 40395 and split arm 30866.

I need one left and one right hand crank window arm kit. The 5.5 inch white thing that the handle screws onto are stripped and so the white thing won't stay tight to the window. the arm is about 5.5 inches. I need the kit that includes the white part that you see inside the house and the arms tha ... (cont.)

I ordered the 39-188 and 39-187 dyad cranks and I received them this week. I attempted to install them; however, they do not fit correctly. The crank arm zigzag is a different shape, which does not allow the window to close entirely. I ordered these parts based on the dimensions from the website - 5 ... (cont.)

Crank on right side of window. Lock on left side. Outswing to the exterior right.

My hardware broke and I need a replacement. In the photo you can see the temporary repair I did to it by adding steel plates to top and bottom. After searching the Internet the closest replacement I could find is your 39-089. It looks like it has a single bend (Z-style) arm; not a double bend (W-sty ... (cont.)

The rotating window crank gears are stripped. The hinges work fine after I added grease. Can I replace the crank or do I need the whole assembly? Can you identify the make/model?Here are the dimensions of the base of the crank in front of the window frame:- width (horizontal) is 5.5"- two screws (no ... (cont.)

Only identification number is 30866 on arm. Truth logo on the other arm.

Looks like I have a Truth 30818. What parts do I need to replace it? What do you recommend?

We are trying to find a replacement for our Truth hardware window operator. It is from the right hand side of the window and inside of it it says: US Pat. 4505601 Any help yould be appreciated. Thanks, Katie

one side of screw hole broken, so the operator won't work smoothly, may looking for a replacement or the way to secure the side

I need to replace these parts. Part is. Truth. 40887 bolt holes are five inches apart

I need a replacement handle for a Patriot casement window. The window is about 25 years old. The cast metal base cracked.

Mine is very similar to 39-090. It's truth brand. It's 5 inch. On mine the small bar is 3". Will that be a problem?

Good morning. I am in the process of replacing a Swisco Window Dyad Crank, 5" and see that there are 2 like parts - 39-089 and 39-187, the exception being the crank arm has a different zigzag shape position. Which Dyad part number between 39-089 and 39-187 should I order from your parts department ... (cont.)

I go the 39-089 window dyad crank 5" but it's too long. I posted picture of the old one. I posted the 2nd picture but not sure if it's the part number or not.

Hello- I need to replace the part in the pictures. This is marked with the manufacturer Truth. The operator has two part numbers, 30615 and 30894. The crank arm has part number 45054. It looks like I can use Swissco part number 39-089 to replace this. I

I am looking for a truth left hand dyer operator like pictured on this page except it has a third mounting hole centered on the bottom exposed.

Please see attached photos, markings 40395,40364 and 30866. I need 1 left and 1 right hand. Please quote. Thanks.