Viewing all customer Discussions for:

39-092 ROTO Casement Operator

12c-is23 interlock see photos attached 2005 product certainty casement need to replace hardward attached to sash as shown 8083591771 doug where to get these parts

Hello, I would like to replace several casement operators and hinges which where originally installed with Milgard windows. I would appreciate your suggestions as to what I may use to complete this task. Thank you. Mike

You previously helped me decide the parts I needed but I don't believe they are correct. Please see the attached picture and help me confirm the part I need and if I need to return what I purchased.

Hi!We have 9 beautiful Carolina windows with hardware that is falling out one by one. We got a quote for replacing the windows and it would be $10K. And then I found your website so I'm really hoping you can help!Thank you!Lindsey

Hello. My name is Brice. I have ten windows made by Roto with broken cranks that need replaced. I purchased my home a few months ago, and I can tell the eight other windows in my home have already been replaced. I have a conglomerate of parts, but I am missing the correct hinge set. The original is ... (cont.)

window doesn't close all the way

Several of my Milgard awning window crank handles are stripped (The plastic sleeve inside the handle socket) and i'm looking for replacements. They are 5/16" hex sockets, folding. Your 39-224 appears to be the correct part. Does it come in any other color besides white? Mine appear to be either bro ... (cont.)

Hi, I'm looking for the hinge part of this crank. I hopr the pictures are good enough to help identify what I need. There is a word on them but can't make it out. Any help would be greatly appreciated.

Hello, I would like to replace several Milgard casement window controls and hinges. Will the 39-091 series controls and the 36-004-10 hinges be compatible? Besides the cranks, are there other parts I need to have an operating window? Thank you. Mike

Need to replace my milguard casement hardware. Window does not close.

I have measured the hex bolt this attaches to and it appears to be 11/32 Would I be right in that? 5/16 seems to be fractionally too small. The casement window this handle is for is about 10 years old.

The mechanism is longer opening the window. I don't know the window brand and I don't have any serial numbers. I need left and right opening mechanisms.

Hello, Are you able to provide a replacement Window Crank Operator like the one in the pictures. NOTE: One in picture is for right-hand window; need one for left-hand. Thank you! Brian

Hello I'm looking for parts to replace old window Hardware. It is Roto manufacture but I did not quite find match using the number on ARM. I would like to get new operator, the arm and optionally the bracket from image 3208 (as it is getting old and broken as well - just the plastic) Please let ... (cont.)

Both the top and bottom assemblies are rusted and broken. I would need to replace both. Do you have a part you could recommend for top and a part for bottom?

I am looking for these operators in bronze, are there any bronze available?

43/4 IN CENTER TO HOLES . OPERATOR IS 5 1/4 INCHES WIDE. SPLIT ARME 3" AND 5"

the operator arm measures 3 1/2 inches

Hello, There! I am looking for Milgard 3510 Casement Operator and Handle. The part number for the operator is HA0391OPCY (Operator RH 3510 Clay). Handle would be HL0137CY. Hope the pictures help.

I'm looking for the arm in the picture. It will (or should fit) on your part # 39-092. It's 5 3/8" long and the small square swivel piece on the end which measure 5/8 X 5/8 has a piece cracked off of it and no longer stays in the track on the underside of the casement window. I bought your part ... (cont.)