Viewing all customer Discussions for:

39-107 Truth Hardware Operator Cover

I need replacement hardware for my window. Was able to see the words, Entry Gard Truth and the numbers L30841 and 20810. Please see attached photos.

Need part number s for left and right please.

Hello, The worm gear that turns the cogs to open/close the window has become dislodged from its base. I see that there are matching grooves on the side of the worm gear housing and the internal aspect of the base. Can these two parts be put back together again by applying force to the worm gear t ... (cont.)

I have a casement window that needs the dual arm operator replaced (truth entryguard 30744). The window swings out and to the left + has the crank in the center (not the type that folds down). Can you tell me the correct replacement part?

Hello- We have truth window hardware (we think from the 1980s) and the small part that goes into the crank handle appears to be damaged so is no longer catching the gear properly to crank the window open. Is this a smaller part we can replace or do we need to replace the entire operator system? If ... (cont.)

The crank assembly in pic 5705 will open but not close the window. When attempting to close, the handle screws out. The other photos are of the mitered lower trim pieces on the window exterior. The photos are of 2 different sized windows.

I have two windows that are missing the stem, the cover, and the handle. I read a post from someone to Swisco that I may need to replace the EntryGard Dual Arm Operator, 39-031 and 39-032. I looked at it online and it shows that the long arm is 10 3/4" but mine is only approximately 9 1/2". The shor ... (cont.)

We Need replacement window hardware to match this picture. Can you help us?

Need to replace rusted out mounting to crank arm?

Some part #s on the Truth entry guard- 30842R; 20810 and 30744. Need left an right for 22" windows.

We are looking for this crank, but have been unable to find something similar.

Looking for replacements. Not sure what I am looking for Thanks

I am looking for a truth brand dual arm window crank replacement I need about 4 of them. The long arm is 9-3/8" long and the short arm is 7-5/8" long. The base plate is 4-7/8" x 2-1/16". Can you please help me find these parts?

The brand looks like "Truth" On the base is the number 403272. On the top arm is the number L30841 On the back of the sentry guard arm is the number 30470LH

I need window crank left side and the metal under window the long arm slides on.

Need help to find the proper cranks. They don't close anymore. I have to pull on the window while cranking it closed. Any help would be appreciated. Thanks.

Similar in arm measures as described but the screw pattern is completely different. Which do you recommend? Could I make new screw holes in the window to accommodate your's?

I need a replacement part for the crank system (not the handle) for a Milgard casement window. Thanks.

Require placement cranks. A right and left crank.

Hello Both sides of bow window broken. Cranks stripped, spins and mechanism won't work. Only way to open is to unlock and pull from outside. Need complete assemblies for right and left side. Thanks Tom