Viewing all customer Discussions for:

39-107 Truth Hardware Operator Cover

There are markings on one of the enclosures. Some windows swing open on the left and others on the right

My window is missing the piece that connects the handle to the cogs/gears on the opener. I have the old cover but it is badly discolored. I also have the old handle but it is damaged. I was able to slide a piece of half inch dowel into the barrel opening up the gear cogs.The hardware has the word "t ... (cont.)

Can you help me identify a replacement part?

Hi. Included are 2 pictures of my wondow crank that needs replacement. A tooth from one of the gears broke. I point it out with my needle nose pliers. Thanks. Ted

Hi, We have very old casement windows and the handles are starting to break off. Inside the handle, it says 45054. Do I need to replace the entire mechanism? It looks like this one is more than just the handle. What do you recommend? Eva

Teeth of swing left window (viewed from inside looking out) are broken so window won't open. Need a replacement for it.

Please help. Need right and left

When looking from the inside out , need 3 that window opens to the left and one window opens to right. Long extender bar measures approximately 81/2 inches. Can you help me out.

I believe this is a truth part. Say LH as can be seen in picture Also the arm has this number 501-11-3L

can you tell me what i need?

I need replacement hardware for my window. Was able to see the words, Entry Gard Truth and the numbers L30841 and 20810. Please see attached photos.

Need part number s for left and right please.

Hello, The worm gear that turns the cogs to open/close the window has become dislodged from its base. I see that there are matching grooves on the side of the worm gear housing and the internal aspect of the base. Can these two parts be put back together again by applying force to the worm gear t ... (cont.)

I have a casement window that needs the dual arm operator replaced (truth entryguard 30744). The window swings out and to the left + has the crank in the center (not the type that folds down). Can you tell me the correct replacement part?

Hello- We have truth window hardware (we think from the 1980s) and the small part that goes into the crank handle appears to be damaged so is no longer catching the gear properly to crank the window open. Is this a smaller part we can replace or do we need to replace the entire operator system? If ... (cont.)

The crank assembly in pic 5705 will open but not close the window. When attempting to close, the handle screws out. The other photos are of the mitered lower trim pieces on the window exterior. The photos are of 2 different sized windows.

I have two windows that are missing the stem, the cover, and the handle. I read a post from someone to Swisco that I may need to replace the EntryGard Dual Arm Operator, 39-031 and 39-032. I looked at it online and it shows that the long arm is 10 3/4" but mine is only approximately 9 1/2". The shor ... (cont.)

We Need replacement window hardware to match this picture. Can you help us?

Need to replace rusted out mounting to crank arm?

Some part #s on the Truth entry guard- 30842R; 20810 and 30744. Need left an right for 22" windows.