Viewing all customer Discussions for:

39-107 Truth Hardware Operator Cover

I need to identify and replace the crank covers on several windows right hand and left. It looks to be a truth entry guard.

Hello everyone. I hope you and your families are safe. I'm looking for replacement arm operator cranks for my Lincoln kitchen and bedroom windows. I've lived in the house 30 yrs (1989). I need parts for the left and right windows of the bedroom and kitchen. The serial number on the existing Lincoln ... (cont.)

Truth entrygard 20755

Good Morning, Can you please let us know which parts we need to order from your site? We are replacing all the parts seen in the pictures included. Thank you!

Need the track/ guides for newer replacements Also the pin that mounts on window sash for the short arm

I need the left hand not this phot of right hand Thanks John

I have two different Vetter window cranks from 1994. There are two photos of Window1, and three photos of Window2 Dimensions are marked in the photos. I realize I will have to remove that trim, but didn't want to do it today until I get an idea of when I could get replacements.

Howdy! My casement window operator arm is no longer attached to the window. It looks like I'm missing the pin that goes through the operator arm into the window. Can you advise? Many thanks! Stee

Installed on Marvin windows ~30 years agoMfrd by Miller Mfg Inc, Santa Clara, CA

The sprocket (crank?) is worn and cover has no collar for sprocket to stay in

Hello, My window operator won't fully close the window, I think the teeth are damaged. Can you identify this model? I couldn't find any manufacturer markings on the window. Thank you.

Entry gard Truth The part I would like to replace is the bottom rusted bar that is attached to a track under the window sash. The bar is 5 inches and the track under the window sash is 7 inches. Thanks!

I need help figuring out which parts these are so I can order more.Thanks!Beth

This product was made by truth hardware I can't seem to find it on their site there was a number on the arm of the mechanism it is R30842 and I didn't seem to have any luck with that either the window is in great shape it's just the crank out pin gets stripped or chipped and even the mechanism is ... (cont.)

I'm looking for the replacement "clip" and "track" that hold the window corner in. In the attached images, the clip is out of the track and rotated 90 degrees so it is perpendicular to the track that I think it should be riding in. The crank and other levers are intact and pull the window in, but ... (cont.)

I'm looking to replace a crank on one side of the window. 34801L Either a 6 or 9 on right side.

I have 2 windows that need same part. Left and Right handle side. These windows are on the sides of my large picture window in living room.

I need to replace the entire cranking shaft.

I have a couple of casement window operators which no longer function properly. They appear to be Truth EntryGard dual arm cranks, and I found markings for 20544 and 30744 on them. Can you assist by confirming the proper replacement parts? Both left and and right hand are needed. I believe the repla ... (cont.)

We are looking for replacement parts for our crank out windows. The current parts have the name Entrygard Truth on them. One pic shows a number 31538A We would need one for left and right crank out. We will need the exterior crank out part as well as the inside cranks. Happy to send more p ... (cont.)