Viewing all customer Discussions for:

39-107 Truth Hardware Operator Cover

The part that holds the crank against the cover also broke on mine. Now when I crank in, the crank comes completely off. Does the ring that is broken hold the crank in or is something stripped on the inside that would hold the crank? Also, from my picture, could you tell me what color of 39-107 I ... (cont.)

Good Morning: Attached please find photographs of a broken window crank. The only identify marks are the numbers on the window hinge and MW on the plastic crank cover. The end of the spiral crank has broken off and I cannot close the window with the crank.

I have caradco casement windows from the late 80's Will the fold away handle and cover fit where the cover that matches your part 39-107 is now?

The crank has fallen off and just turns. The part is by TRUTH and says Made in the USA. Pictures attached. Do I need to replace the whole operating mechanism? Thank you.

Kolbe windows installed in 1995. Please help There are 52 windows. Not sure how they are called out properly but from the inside as I look at them I have 27 units with the crank/hinge on the left side and 25 units with the crank/hinge on the right. Listed below are the part numbers I believe a ... (cont.)

I have a Barber and Ross Casement window in my kitchen that was installed when the house was new in 1995. The crank can open the window but when you turn the handle to close it, it just spins. The kitchen as two windows that open out from the center with two cranks and both have the same problem. I ... (cont.)

Part # 30748 along with 10" attached to window frame see images.

I am looking for folding cranks $ covers for Caradco casement windows. Do you have a product that will fit? Thank You

I need to replace 4 Caradco window cranks and hardware. Are the cranks standard for all windows or do I need a serial number, if I do where is it located on the handle. How do we determine if the crank is a left or right opening operator? We can't open the windows to check bc they arevery diffic ... (cont.)

We need to replace hardware for Caradco casement windows. The mechanism, arms, and handles. Are there different sizes and dimensions? Can you tell me what would best match the attached pictures? I'm hoping you will be able to respond immediately and appreciate any help you can offer. ... (cont.)

Hello, I'm hoping you may be able to help identify (and possibly replace) a rather mysterious crank cover window part (I think it's called a "Pull") that I've. It is the cover that goes the mechanism of a crank window opener (see attached files). I don't need the crank or the mechanism, but I ... (cont.)

I have a Casement bay window where both the left and right operators are broken. I can not identify the brand of the window. Please let me know if you have any information from the attached images. Thank you!

Crestwood Windows purchased at Home Depot 1996 I need: two - handles #45054 five - covers (no number) Color described as pewter on original invoice. Any help would be greatly appreciated. Thank you

The crank handle came out of the mechanism. The window is a side out (left to right). The crank cover lays up against the ledge. The cover looks like part 39-322, but it isn't brass. It looks like white metal. I don't have any pictures, but I can take some. The part that holds the crank agains ... (cont.)

I need help before ordering a replacement window crank. The number on the hinge is 20755. I think it's a 9 1/2". Please take a look at the attached photos.

Are the Truth Hardware Contour Cover (39-323) and the Truth Hardware Operator Cover (39-107) interchangable so that either one can be used on the same window?

looking for this hardware in dark bronze. can you help?

I need to buy a new crank assembly and cover and I'm ok on what I need but I can't distinguish the bronze vs dark bronze. I don't need a handle but as it is the same color that I will need for the cover, is handle part #45012 bronze or dark bronze? Thank You

My home is 25 years old and some BiltBest window hand cranks need replaced. What is the best way to identify the window hand crank to insure correct order/replacement??? Is there a model number? Does the age of home help identify the BiltBest window hand crank?? Thank you in advance for your ... (cont.)

I eyed up the old part and incorrectly ordered item number 39-155. Now that I took out the old part I see the new one won't fit. I can now see numbers stamped on the old crank: on the gear is 30844R and on the lever is 30842R and the word "TRUTH" is also stamped on the assembly. Could I return the u ... (cont.)