Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

This is in addition to the 5 pictures sent On the window it says Thermapane MA if that means anything

Looking for a replacement crank for a few windows I have. This is an awning window and I have a right swing same style

I'm trying to locate a Marvin handle that attaches to a Truth operator with code 20810a as in the picture. Could you please help ? Thanks.

I need to identify and replace the crank covers on several windows right hand and left. It looks to be a truth entry guard.

Hello everyone. I hope you and your families are safe. I'm looking for replacement arm operator cranks for my Lincoln kitchen and bedroom windows. I've lived in the house 30 yrs (1989). I need parts for the left and right windows of the bedroom and kitchen. The serial number on the existing Lincoln ... (cont.)

Truth entrygard 20755

Good Morning, Can you please let us know which parts we need to order from your site? We are replacing all the parts seen in the pictures included. Thank you!

Do you have this part . The crank says loewan on it . There is a worm gear and crank not shown here's.

I need 12 casement arms and cranks as described on the photos and text above. Please let me know ASAP if you can get these parts and the cost. Do you also install if you have them?

The house was built in 1994 with wooden Weathershield windows. The number on the metal inside window is: WS IGCC (R) CBA The window screen measures about 30"w x 29.5" h The crank housing (?) is about 5" wide. It looks like the handle mechanism is stripped. I've attached photos and hope you can te ... (cont.)

Need the track/ guides for newer replacements Also the pin that mounts on window sash for the short arm

I need the left hand not this phot of right hand Thanks John

I have two different Vetter window cranks from 1994. There are two photos of Window1, and three photos of Window2 Dimensions are marked in the photos. I realize I will have to remove that trim, but didn't want to do it today until I get an idea of when I could get replacements.

I need the center opening mechanism for one window and when looking from the outside the bar assembly

Howdy! My casement window operator arm is no longer attached to the window. It looks like I'm missing the pin that goes through the operator arm into the window. Can you advise? Many thanks! Stee

Need the full awning window mechanism 40511.

Need right and left opening mechanisms for 8 windows.Model # on casing 40055 Brand Malta.

I don't see any part numbers but they are marked Truth. I am looking for both RH and LH versions of both the operator and latch. The operator arm is 9 1/2" long. I am open to a different style if they will fit. I believe the windows are Norco - about 20 years old. I plan to update all the window ... (cont.)

The sprocket (crank?) is worn and cover has no collar for sprocket to stay in

Hello, My window operator won't fully close the window, I think the teeth are damaged. Can you identify this model? I couldn't find any manufacturer markings on the window. Thank you.