Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Can you match up this crank handle I will need about a dozen or more. It's for Kolbe & Kolbe casements.

Just spoke to Weathershield, who said these 1996 vintage cranks are from Truth Hardware. I'd like to order several (6-10 to have some on hand for the future). I hope you can help me, thanks! Scott

OPO6-7515-00 95/04/11 107046M

Hello! The crank dial thingie is stripped so that you have to manually pull the window open and then the crank resumes working to full open. I do not have the crank - my dad lost it years ago so I tried with one from another window and that is what I discovered. The thing is heavy - steel, maybe? Th ... (cont.)

I am looking for a replacement awning window operator. Very odd unequal arm operator. Please see photos.

Hello, I am searching for 5 window cranks and one cover for lowEnter windows, I was working with another company and they sent me the wrong hardware as seen in the picture also the wrong color, I also have had a bad relations with our local rep and repair service some of these have been going on for ... (cont.)

Hi there, Recent home buyer here. I'm looking to replace two awning window operators that appear to have broken. The windows do not shut unless pushed from the outside. When you turn the crank, you can still push them open, but when you turn the crank to close it, the crank and screw inside begin t ... (cont.)

Handle is not always turning and we have to push the window shut so we can lock it. I would appreciate it if you could identify the correct replacement part. Thank you!

I have some pics to try and identify the exact replacement. Need 3 crank w/ handles. Check the photos out here: https://photos.app.goo.gl/KyxCeiPwHCkYNRmL6 Window looks like a installer/builder number not the retailer. Not sure! Let me know if anything else is needed. Thanks!

This is a Truth 45251 I need to replace, plus the piece that screws into the window, its all one piece. Window was from 2003 with Truth parts Other numbers on arm are 31850... Number on the back of the crank mechanism is 05282003 0233

I have two Caradco casement window cranks (R and L) that need replacement. I cannot find an exact match on your website. I see similar ones, but mine is 13-1/2?. Can you suggest a replacement? Do you need other info that I can provide without removing what I have?

I have a home full of 1960s' Andersen casements....I need new roto-gear operators... existing hdwr. has a number #7073A...base is 3 3/4" wide, screwholes are 31/8" wide arm lever is 7 1/2"......can you help? thank you, John

I have two vertical casement windows measuring 70-3/4" high x 26-1-2" wide.They flank an atrium door. One opens to the right, the other to the left. The operator handle has never been strong enough to open or close these windows without giving them a push, both from inside and out. The handles now d ... (cont.)

I need to replace both of these window operators as in pictures posted. They both have the word "Truth" engraved on the parts. Both operators are for left side crank windows. The long arm on both measures 9-1/2" in length. I am looking to purchase one of each. I do not need any additional parts as i ... (cont.)

Do your company sell this part

Hello my window is marked as GU, 11" arm length. Do you know the correct replacement arm? Thank you!

I need to replace several truth window operators ( I measure the single arm at 8.5" from the center of the pin to the gear center pin)I also need several of the window limiters in the picture. (measure the limiter bar at 6" long)I also need operator handles and covers.Can I get part information and ... (cont.)

Hello looking to replace the entire hardware for my window. I need the Operator, track, handle, latch both right and left sides. These windows likely go back a far 60's or 70's. can you please links where I find this hardware on your site?

I'm trying to replace an operator arm from an Anderson window. Part number 7073B. See photos. Andersen wants $191 for one arm.

Looking for the correct window crank assemblies. Not sure if I need the parts shown in the photos marked #4 and #5. If the components in photos 4 and 5 cannot not be separated or disconnected without being damaged, then please provide part numbers for all of the components shown in the photos from ... (cont.)