Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Hi, I am looking for 2 Caradco window cranks. 1 in white and 1 in bronze. Unfortunately, I don't know the model for these. They are both the same, just different colors. My best attempt at measurements are 4 1/4 x 2 1/4, with a spline of 1/4. This is for a customer remodel, so if possible, let me kn ... (cont.)

Handle has a part #45012. The locking screw threads are stripped. Also, how do you get the mechanism out of the window frame, as I don't see any screws from either side.

Where can I find a replacement for the following item? Is it under warranty? 0P05-7540-03 03-16-07 78652

Left Hand Alcoa Casement operator

40055 T LH 4

This is truth 45047. Do you have anything I can use as a replacement?

hi, I found your site while looking for hardware to replace Andersen window casings 7030A (2) and B. The 'genuine' Anderson parts are $150+ each. Way too much... I saw a thread where someone recommended the 39-094. Later someone posted that they installed this, but they had to do a lot of work shavi ... (cont.)

Markings on window : IGCC496 CBA Marvin Can the operator crank and window locks be retro-fitted with updated hardware in a white color ?

looking for a weather shield snap on crank

Hi, I need window operators (L & R) to replace 2 Reuten operators on an older window. I have attached two pictures, an overall and a detail of the crank mechanism. The length from the arm's hub (?) to the center of the wheel (bushing?) that slides in the track is right at 11 inches. Do you have som ... (cont.)

I need a pin to fix this K&K window crank. Thx!

Can you tell from the attached photos if the color is dark bronze or just bronze? Can you tell from the attached photos if the size is correct? Is the 39-138 single arm crank available in bronze or clay? Is 39-114L the matching crank handle?

This is a ROTO Window operator part needs to be replace. But we can identify it. Hope you guys can help me. Thank you very much.

I need three K&K window cranks.

could not see any markings on Caradco casement crank I hope you can get the description from the 3 pictures I am sending. Thanks, G. H.

I am trying to find a replacement operator for an older weathershield casement.

Hello, These are pictures of my casement window crank mechanism after removing from the window sill. Thanks for the video! I was able to remove it exactly as filmed! I'd like to get a confirmation on which is the correct replacement part. The crank was mounted on the left side of the sill, and t ... (cont.)

Need both left and right. Caradco Entry Guard-Truth 20755 30842R and L

I need some help choosing a replacement for the casement window in the picture. My main problem is that the handle is 4 inches long. All of the operators on line seem to have a length of 5 inches at least. SO they will not fit in the opening in the wood I currently have. thank you Cris ... (cont.)

looking for replacement Ends are gone