Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

numbers 30842r U.S. patent 4.241.541 CAN patent 350.432 pat. 1982 Ineed a new mechanism with handle and plastic cover to hide the mechanism.

The threaded crank fitting came loose on my casement window. is there a tool needed to tighten it?

I have an operator with part number 0P06-7533-08 on it. I have seen similar operators on the website but not this one. Production numbers are 10-31-13 133886

To Whom it May Concern, We have a K & K casement window that was installed 30 years ago and we need to replace the operator. The only number on the operator that I found was 40471. Any help you can provide would be greatly appreciated. Thank you for your time. Sincerely, Joe

It is a Truth brand, and the # I believe identifies it is 30744 although the following #'s were also on there, 40574 and 45108. The long arm is 9.5" in length. The crank to open'close is in the middle. Do you have a replacement for this? Sincerely, Sheila

I'm trying to find replacement hardware for 2 casement windows. The old mechanism's say Entry Guard and shows # 30744 on the arm. Can you ID from this? Please advise. Thank you, Tom

How do I measure my window crank to verify that my window uses 11/32"

Operator I am trying to replace for Andersen wood casement window.

We need a replacement casement window crank. This crank is on the left hand side of a verically (left to right) opening window. The whole crank is not functioning and we would like to replace it. So we need more than a new handle, the whole mechanism to open the window. Do you have a replacement ... (cont.)

I have a Peachtree casement window that doesn

The crank piece on this pulls right off. Still works, but would like to replace it, along with the piece it goes into.. the casing? What would I buy?

The gears on my cranks on some of my windows are worn out. Need new crank/operators. The plate for the operator says "Truth" Small control arm has # 20755

I'm loking for this handle. Pat. number on the underside reads PAT 4,083,264 and PAT.4,189,248

Do you know what is the brand?

I do not see any identifying names on this mechanism. I am on the ocean and keep windows open all the time, so salt air and exposure make for rusted mechanisms. I have contractor friends and also a handyman who can do the work. Please let me know if you need more detailed photos. Thanks for your ... (cont.)

Numbers on the part: 20755, 30842R, 40471, pat. #1982

I have a broken operator on a Caradco casement window. The operator's single arm is stamped Truth 3075. Can you help find a replacement operator?

Hurd Casement Window Black crank mechanism with gold/taupe finish Wright imprinted on black crank 7701 on backside of mechanism Need multiples.

Swisco...I have a need to replace a few of these sealing gaskets on my casement windows. I believe these are Patriot Windows. Many thanks, Paul.

Please see attached photos. I am looking for window cranks for crank-out windows. Need a number of them. Probably would also like to buy related hardware to completely rebuild window mechanisms.