Viewing all customer Discussions for:

15-046 Pivot Shoe, 1/2" Thick

Hello. The patriot window is a 1600 model according to upper sticker in window. the bottom shoe that the spiral rod goes into is broken and can not use small screw to secure rod. do your records indicate the proper size shoe needed for the 1600?

I do have the pivot bar and have used them on other windows. I need 2 more parts part 26-040 3" pivot bar with the mill finish aluminum channels as shown. Or a suitable substitute. Also needed is 3 each Pivot shoe 1/2" thick part no. 15-046 Please contact me asap!

I have some single hung tilt windows that will not stay in the up position . upon inspection I found that the pivot shoes on most of the windows are broken where the hooks would go to attach to the spiral balances ( would need 5/8 600 blue tip). It seams that most of the spiral balances are ok an ... (cont.)

Need several old PGT balancers. No numbers on these. The 'spring channel' is 34 7/8 inches & the 'tab' on the end is 1/2". Thanks! Bob

I need (4) replacement pivot lock shoes. The dimensions are 1 3/16" wide 1/2 " thick between 2 1/8" and 2 3/16" long

I have single tilt widows and these pieces broke i believe this it the end on the sash support with the rectangle inside the circle it closely resembles a 900 series you carry i would also like to replace the sash supports as well

Can someone confirm the part I have here pictured it's measurements are 2" x 1 1/4 x 1/2" thick

Hello, I think the measurement on this is 2 high x 1.25 wide by .5 deep. It looks most like the 15-046 but as you can see the center is blue. Do you know what pivot this is? I already bought some 15-154 but now see that my pivot does not have the blue part recessed. Thank you, Will ... (cont.)

I ordered new pivot shoes (15-046) and spiral balances (S600-35) for some Patriot tilt-out windows in my home. However, I have noticed that some of the shoes have a screw attach on the pivot shoe. I guess this keeps the spiral balance rod from slipping out of the pivot shoe grove. Is this required u ... (cont.)

THESE WINDOWS HAVE BEEN IN THE HOUSE SINCE 1996 SINCE WE MOVED IN. THIS FIRST PICTURE IS THE PART THAT WE NEED. THIS PART IS STILL WORKING IN THE WINDOW. I WILL SEND YOU THREE OTHER PICTURES OF THE WINDOW WITH THE BROKEN PART. YOU SHOULD NOW HAVE FOUR SHOTS OF THE PARTS...THE FIRST IS WORKING ... (cont.)

we need to locate a replacement carriage for the attached photo

2" long, 1 1/4" wide, and 17/32" thick. I'm assuming either the 15-015 or the 15-046 would work. Any advice on which one? Thanks, Bob

Any help appreciated. 1/2 x 1 1/4 x 2 and spiral shoe?

The metal tube lenght is 28.5 inches. The diameter is 3/8 of a inch. There is a vinyl tube over metal tube. On the window lock it said Acorn. Thank You. Randy

I am not sure you can help me but if you can turn the photo clockwise 90 degrees you may be able to get a better idea of what B 49 Stasio Lumber Classic VRW WHT

I am interested in purchasing two Pivot Shoes to replace the broken ones. The Dimensions are 1 1/4 inches long and 1/2 inch (thick)

Does 15-046 have a rear brake?

I am looking for a pivot shoe that looks like your 15-208, has the same dimensions and has a rear brake pad but accepts a 26-068 pivot bar. The shoe is for a sliding window so it is in the head and sill of the frame and has no springs attached. It's sole purpose is to lock the window in place when ... (cont.)

I need a replacement for a Patriot window pivot slash (2 1/4 H x 1 1/4W x 1/2 D).

I have a single hung tilt sash window with double coil balances on either side. The coils are 1/2 inches wide. The outboard coils are marked 540 and are okay. The inboard coils are marked 640 and are both broken. The sash measures 41 x 23 and the window brand is unknown. The pivot shoe closely ... (cont.)