Viewing all customer Discussions for:

39-140 Dual Arm Crank, 16"

Actually looking for the inserted nut that holds the crank auger screw in the cranking mechanism. Sorry for the lack of correct terms.

We have several small Malta awning windows and the crank out part seems to be stripped or something. You can crank it out, but it won't crank back in to close it. Can you help?

I have a project house built in 1978 using SEMCO awning windows and need a few crank handles. The interior spline/gear dimension appears to be 3/8" but the exterior entry to that is a bit larger like 7/16". Will this 39-104 work?

I need the white part of window part.

There's an item part number of 45301 stamped on the bottom Need to get a replacement assembly for one of our casement windows.

for double hinge crank is stripped

I cannot close this window. There is a circular disk that keeps coming out as I try to close window. Not sure how it supposed to stay in the hole or if it is stripped out. Thank you, Tony

This is the same as another windows operator that is broken. I can get some info from the crank and window but not the operator, so I need to know what part number I can use to replace it. Any help would be really great, thank you!

Looking to replace this semco window latch. These windows are at least 30 years old. The window opens upright bottom to top. Please advise. Thank you!

Looking for this particular color

need help identifying.

No identifying information. Do not want to disassemble sash until I can find replacement. (wood sash needs to be removed on sides/bottom to get to mechanism) NO visible screws without removing sash. House built in early 1970's. Width of cast cover is 5".

I need to replace what appears to be an awning style part not 39-037 whole window parts including the screw out/in mechanism with a center drive. the armatures are approximately 6" long for each of the scissor parts. The part listed above is for a 13 1/8" so it may not be the correct replacement num ... (cont.)

Replace the whole assembly. Pictured is a working crank.

I would like to replace the operator on my window.

I just purchased a house in Farmington hills Michigan. Most windows have these type of closing mechanisms took pictures that I saw but don't know what their replacements are. Can you please assist

Hello Customer Service, The pictures is of one of the working windows - the windows not working are missing the bar that connects to the window to the arms as demonstrated in the close up picture. I need at least two full assemblies.IMG 14 thru 19 are from the broken assembly. Img 20 is from a wi ... (cont.)

Hi I am Jeff Bozem an electrical contractor from Los Angeles. A homeowner asked us trouble-shoot & repair/replace non working problems. We have traced problem to the TRUTH Hardware mechanical operators. I have included pics of actual unit...the following info is stamped on actual Hardware TRU ... (cont.)

Can i replace this part its brokeThank youKaleen

I'm renovating a bathroom and someone has stripped the inside cylinder if the locking mechanism. I think it's best to just replace the whole thing. The window itself is in good shape and it's on the second floor , stucco exterior. It's a small window, do you have a suggestion for which item I should ... (cont.)