Viewing all customer Discussions for:

39-140 Dual Arm Crank, 16"

I just purchased a house in Farmington hills Michigan. Most windows have these type of closing mechanisms took pictures that I saw but don't know what their replacements are. Can you please assist

Hello Customer Service, The pictures is of one of the working windows - the windows not working are missing the bar that connects to the window to the arms as demonstrated in the close up picture. I need at least two full assemblies.IMG 14 thru 19 are from the broken assembly. Img 20 is from a wi ... (cont.)

Hi I am Jeff Bozem an electrical contractor from Los Angeles. A homeowner asked us trouble-shoot & repair/replace non working problems. We have traced problem to the TRUTH Hardware mechanical operators. I have included pics of actual unit...the following info is stamped on actual Hardware TRU ... (cont.)

Can i replace this part its brokeThank youKaleen

I'm renovating a bathroom and someone has stripped the inside cylinder if the locking mechanism. I think it's best to just replace the whole thing. The window itself is in good shape and it's on the second floor , stucco exterior. It's a small window, do you have a suggestion for which item I should ... (cont.)

Window opening size is 20 inches vertical 30 inches horizontal. Crank does not move window and is loose when turned. Numbers are DF 1100A; CCMC 9186; Brevet Can #1,160,103; Brevet USA #4,400,923; ????????A3,B3, C3.Side arms are ok.The window moves freely when pushed in or out by hand with the c ... (cont.)

We have 3 casement windows on which the cranks have all broken. I've attached pictures here (all 3 are identical). The mechanism on the windows themselves still work, but the cranks themselves are not working because the stem seems to have come apart from the base (I'm not sure if I'm using the ter ... (cont.)

I have a Truth 40078 dual arm with a crank that is labeled 1(possibly I)2 45054. The operator has broken on the inside, so I believe my only option is to replace. I have a couple of items in my cart, that look close, but I was wondering if you had any suggestions.

I am looking for a window crank Truth Hardware 21" Dual pull Roto-gear Awning Window Operator #30895A white color

Here are all the numbers on the part that needs replace: us pat 4505601 pat can 1986 4 made in usa truth 45301

We recently bought a house that has casement windows in it. Two of the windows have operators that are broken. I need to communicate with someone who can help me identify the item so that I can order it. The home improvement stores in this area do not stock the item that I need so I am reaching out ... (cont.)

Hi, I need a replacement Awning window dual arm operator. The manufacturer of the window and awning operator is not known. What would be the replacement Awning operator for my window Width 18.5in x Height 19.5 in. Awning window dual arm crank operator with single pull lock. The operator measures 16 ... (cont.)

I have a 2020 Awning by Caradco from 93' the handle spline has come apart and I need a new one, I have the original Truth number of 96602 and I believe that the replacement Item number is # 39-140 in bronze

I can't open the window this is the best picture I can get and I need 9 of these

I need the center opening mechanism for one window and when looking from the outside the bar assembly

Need the full awning window mechanism 40511.

Hi this window crank is from a Milgard awning window. We would need 12 of these. Can you let us know if we can purchase these from you.Thank you,Debbie

The retaining bushings are coming loose and I cannot tighten them. Do you have a tool for this?

My casement window no longer opens with the original handle. I bought a new generic handle, but it still did not work. I believe the handle section is stripped and I need a new operator piece , but I do not know what one to order. Please recommend my replacement part. Let me know if you need more ... (cont.)

Hello, I'm hoping you can help me identify this window operator. I need to replace the whole part. The arms measure roughly 16 and 1/8 inches (not certain since I cannot close the window). The crank housing (spline?) measures exactly 5 inches wide. Thank you.