Viewing all customer Discussions for:

39-156 Caradco Window Crank, 9-1/2"

20 yrs plus but in pieces now

These are 2004 Truth Entryguard mechanisms. I was wondering :1. Do these have an adjustment nut ? and do you sell the wrench so they cant be adjusted (the windows rub/sag and need small re-lignment needed.OR 2. What is a good replacement that can be adjusted ?It is my condo in NJ but I live in Fl ... (cont.)

Hello, first of all, trying to identify the make of these 15 yr old parts, and finding replacement for a right-hand and left-hand parts. Please advise. Thank you.

Hello, I'd appreciate your help in identifying a broken window operator mechanism. It's a Truth Hardware piece. The long arm is 9.44" long and the short hand with the joint is 8" long. I'd appreciate it if you sent me a link to purchase a compatible window operator. Thanks, Lee

I don't have any more info other that they are truth windows

I am looking to replace both of the operators on my casement windows. One the gear units has completely strip and the other, I am sure, will be right behind it. The brand is Entry Guard. On the major arm there is a number 40754, on the minor 31538A, there is a 3rd number 20810A. On the base of the g ... (cont.)

Trying to find replacement crank arm mechanism for Norco window. Included picture with tape measure for scaling

There are 3 window operators needed. Two of them from the same pair of side by side windows, one is a left hand and the other a right. But they seem to be a pair. The other is a single operator needed. Of the five photos it is the first or last depending on how they come through, but there is onl ... (cont.)

Hello,I am managing a remodel project in Seattle that has some older vinyl casement windows (Possibly Andersens?) and they are missing a crank and would like to get new crank gear covers as well if possible. I attached pic of one of the cranks off, hope that is enough. I can provide more photos la ... (cont.)

One of Pozzi casement windows (installed in 1989) suddenly stopped closing properly. The worm drive screws out instead of closing the window. In comparing it to one of the other windows, it appears either the gear or the worm drive is worn out. In addition the part that is supposed to hold the wo ... (cont.)

Hello, I am looking for a replacement window crank and arms for a Truth 30744. I attached photos of the part. Can you please guide me to which part number that I should order? Thank you, Rob

I need to replace the whole mechanism in my windows. Attached is a picture of the part it is a Truth Entry Guard device Thank you for your help Debbie

Hi I am looking for all the hardware on KK case window. I didn't take pictures of the lock part, but I am looking for all of the parts on a window. You can see that they're rusted, been used for 30 years. If I were to live in this house for another 30 years, is it a good idea to replace all the part ... (cont.)

Hi - I need both right and left arm replacements for my Truth entry guard casement windows. I think I need 39-031 and 39-032. Is that right? Also looking to replace the covers and handles. Can I replace with 39-107FK the folding handle with cover? Thanks v much. L

We need to replace the crank for this window. Can you help?

I need 10 window replacement closer arms can you give me the name and number of what I need?

pat 4.241.541 40753, 20755,31538A i need 2left and 2 right i am returning 39-032 and 39-031 qty 2 of each i can not find on site either the link arm is to long or to short the ones i rcvd the link arm was to long i need link arm to be 3-3/4 inch long paul

Need to replace the operator assembly in a few windows. Thanks for helping identify. See Pics*Truth Entry GardLooks just like the assembly used in the video on you tube.

This part number is on the cranks R30842 and 30841L need to replace both of these.

I need both left and right crank operators as well as the black plastic pivot slide in the picture. Matching hand cranks in brown also.