Viewing all customer Discussions for:

39-188 Sash Dyad Crank, 5"

please see attached photo. The arm is omly 4 1/2" and the holes are 5 " apart. I could not see anything on the websitePlease advise steve

Not sure if this is correct crank

replacing a Dyad arm 5" arm with the numbers 30615 / 30814stamped inside

Hi, I need a replacement for my casement window. The window swings to the right. Thanks

I recently ordered part numbers 39-188 & 39-187 wanting to replace both crank handles in my daughters bedroom. Parts described have a total arm length of 5 inches. They are proper for a couple of my windows but the one needing to be replaced has a total arm length of approx 4-3/8" with the 5 inch ... (cont.)

Canii get replacement for this.

Republic windows installed early 2000's

I will need to return the 2 cranks i ordered they where wrong. 39-090 and 39-089 my windows do not close all the way.

I have a potential republic window. I am missing the part that attaches to the window. I do not need the handle. I will also need 4 gaskets. There are 3 screws attaching the gear mechanism to the window. The two screws are 5" apart.

I've included all markings on the windows

Dear Sir's,I'm looking to replace the little black plastic mounting piece that the bar marked 31272 attaches to (see arrow). I would also like to get a price to replace the operator assembly with the 1 goldish arm, hopefully without replacing everything else. Lastly I need a price for a replacement ... (cont.)

I need to replace three crank handles all the same size. Can someone call me to walk me through the measurements I need?

30614 30893 30615 30894 I need one each , thank you

I didn't see any markings. I will the kit for both the right and left sides.

This is a 5 inch crank mechanism but I'm not sure if which mechanism I need for my windows

I recently purchased a left and right Sash Dyad Crank, 5" (39-187 39-188) from you to replace the existing broken cranks. Both installed without any issues, however, the right window (as viewed from the inside) has a damaged track which I did not see when I purchased the cranks. I can't seem to f ... (cont.)

I cannot find these parts. There are no markings on the windows to identify who made them. The crank assembly is falling apart and the operating arms are stiff. I'm afraid the next time I use it will be the last time. The window frame width is 16" and the bottom track is 12".

HelloSorry for the poor quality pix but it was the best I could do.This window is approx. 22 X 32. It's a International Window casement type.I'm hoping for a top/bottom set. Regards, Harold

Looking for a Truth Dyad operator with a 4.5" arm. I have purchased the 39-187 & 39-188, and the 5" arm is not properly connecting. Can you think of any alternate solutions?

Can you tell by this pic exactly the replacement set I need. It's Truth hardware. Thanks if you can identify. Ted, Hamilton ON Canada