Viewing all customer Discussions for:

39-188 Sash Dyad Crank, 5"

Windows manufacturer cannot be identified. Crank mechanism needs replacing. Gear axle pops out and doesn't stay in place. Now gear of crank does not engage with hand crank, and may be worn. Attached pictures give best information available. Please advise. Note: This is a casement window, that swi ... (cont.)

It appears that your part # 30-090 is what I am looking for except that it states in the discription that the arm length is 5" long and the one I have is approx 4.4" long. Is there another crank I should be looking at? Thanks, Rich

Hello again, Here are the pictures of the 2 parts, the window casement locker is broken on the tip (the tip should be kind of curbed, and with a hole close to the tip to be screwed to the lever. Hope this will help to identify the parts. The sash Dyad Crank is 5 inch between the screw hole, and ... (cont.)

I believe it's a DYAD , 39-089/39-090 OR 39-187/39-188 I am not sure the difference when it says SASH DYAD or when it says Window DYAD. Also the length of the rod is 4.5" as opposed to 5", not sure if that matters. Hope you can help, can't open either bay vinyl window because both cranks ... (cont.)

Thank you so much for a great website with videos for installation, questions from customers with answers that are informative! I was able to repair my bathroom casement window myself! The quote I got was horrible, so I decided to see if the ancient hardware could be found in a more modern form, lol ... (cont.)

I ordered parts for my window and think I may have the wrong size. I found your parts via this discussion. The person submitting it had identical part as mine. Your company suggested parts #39-187 and 39-188. The arms on mine are 4.5 inches (as in the pictures from the link). The ones's I re ... (cont.)

i'm trying to find the replacement part for the following window operator. I wrote down all the part #'s i could find. DEL MAR HARDWARE 30894 PAT.CANADA 1986 PAT.2135397

Dear Parts Expert, I have a three pane casement window (photo 5) that has an openable center window. The end of the operator broke off and I have attached photos of the operator with measurements. The measurement from the hole to the end of the arm when extended appears to be 9 3/4 inches. The ... (cont.)

Hi I need replacement parts for my casement windows. I think they were Patriot, house built in 1995. One is a set 60" tall, 58 1/2" wide, 2 casements, left and right, side by side. It looks pretty much like parts 39-188 and 39-187 to me, but the arm looks like it is flipped in the opposite dir ... (cont.)

Hi there! My window guy had me order the DYAD 5" CRANK numbers 39-090 and 39-089 (for the left and right windows that we need to replace) from y'all and I currently have them. They look exactly the same as the 39-187, but want to double check before I spray paint them, (as I need them in an alum ... (cont.)

Please help me find this window part - my casement window wont open and close properly - thanks

Hi, I have a harvey window & need a replacement for the window crank casement. The closest I could find was 39-187 & 39-188 but based on the measurements there seems to be a mismatch in the length (5" vs. < 4.5" on the present one that I have - please see picture - on the tape 20"-24.5") Co ... (cont.)

I need two right and two left casement window operators. They are white. A picture is attached. I see two different model numbers on your site that could be the right one. How do we differentiate?

Hi, I am looking for a replacement Window Dyad crank operator with a 5" hole center and a 4.5" arm. I ordered SWISCO product 39-090 which was much too large to close. I am returning them now. But before I reorder I was hoping for some confirmation on these two questions. 1. will SWISCO p/n 39 ... (cont.)

I've identified the replacement parts I need, 39-187 & 39-188. The 39-188 has the option to choose a color while the 39-187 does not. Does this mean 39-187 only comes in white? Thank You, Raymond Sugel Sr

I have some photos for my broken window part, help me look for it and let me know the price, thanks there are words inside: PAT US 4505601 UK PAT 2135397 30614 30893 these might help

What is the difference between the sash crank and the dyad crank other than cost? (pt.39-090 vs. 39-188)