Viewing all customer Discussions for:

39-188 Sash Dyad Crank, 5"

Please identify this part and price. pictures are attached.

I have (2) windows with no labeling and the gears are stripped and I would like to get (2) replacement window cranks. I think that my replacement might be your order 39-187 as they look very close. My other question is i watched the video for 39-187 and it shows the bracket being on top but with ... (cont.)

Hello, I have a condo where the bathroom window crank lo longer connects properly to close the window. One of the residents ordered parts from your company in the past, but I'm not sure what's needed for my situation. Please see the attached photos. Can you please let me know what parts I need ... (cont.)

I recently purchased a 39-188 Sash Dyad Crank arm. It does not properly fit my window. The crank arm I have is exactly the same with one difference. The attaching arm with hole in it on mine is about 6 inches. The one I bought from you is only 5 inches. Everything is exactly the same. Do you have th ... (cont.)

Arm is 4 inch center not 5 Attaching pic Pat # US 4505601 No other markings on operator Need left and right Thanks for your assistance * was inquiring if Part# 39-187 and 39-188 would work for us

I am looking at your Dyad operator #39-188. I have one just like this except the arm length is 4 7/16" instead of the 5". Will that effect the operation of the window or do they make a different arm size?

Hello, I need to replace a stripped crank handle operator for a vinyl casement window. I can't seem to find the right operator anywhere. Please advise. Thanks

In my photo you can see that the new crank that you sent has a longer arm. On the new crank that you sent the number on the arm is 40395. My old crank with the gold arms has no number on that arm. The second arm on both, however, the one that attaches to the window is the same length--number 30866. ... (cont.)

Windows manufacturer cannot be identified. Crank mechanism needs replacing. Gear axle pops out and doesn't stay in place. Now gear of crank does not engage with hand crank, and may be worn. Attached pictures give best information available. Please advise. Note: This is a casement window, that swi ... (cont.)

It appears that your part # 30-090 is what I am looking for except that it states in the discription that the arm length is 5" long and the one I have is approx 4.4" long. Is there another crank I should be looking at? Thanks, Rich

Hello again, Here are the pictures of the 2 parts, the window casement locker is broken on the tip (the tip should be kind of curbed, and with a hole close to the tip to be screwed to the lever. Hope this will help to identify the parts. The sash Dyad Crank is 5 inch between the screw hole, and ... (cont.)

I believe it's a DYAD , 39-089/39-090 OR 39-187/39-188 I am not sure the difference when it says SASH DYAD or when it says Window DYAD. Also the length of the rod is 4.5" as opposed to 5", not sure if that matters. Hope you can help, can't open either bay vinyl window because both cranks ... (cont.)

Thank you so much for a great website with videos for installation, questions from customers with answers that are informative! I was able to repair my bathroom casement window myself! The quote I got was horrible, so I decided to see if the ancient hardware could be found in a more modern form, lol ... (cont.)

I ordered parts for my window and think I may have the wrong size. I found your parts via this discussion. The person submitting it had identical part as mine. Your company suggested parts #39-187 and 39-188. The arms on mine are 4.5 inches (as in the pictures from the link). The ones's I re ... (cont.)

i'm trying to find the replacement part for the following window operator. I wrote down all the part #'s i could find. DEL MAR HARDWARE 30894 PAT.CANADA 1986 PAT.2135397

Dear Parts Expert, I have a three pane casement window (photo 5) that has an openable center window. The end of the operator broke off and I have attached photos of the operator with measurements. The measurement from the hole to the end of the arm when extended appears to be 9 3/4 inches. The ... (cont.)

Hi I need replacement parts for my casement windows. I think they were Patriot, house built in 1995. One is a set 60" tall, 58 1/2" wide, 2 casements, left and right, side by side. It looks pretty much like parts 39-188 and 39-187 to me, but the arm looks like it is flipped in the opposite dir ... (cont.)

Hi there! My window guy had me order the DYAD 5" CRANK numbers 39-090 and 39-089 (for the left and right windows that we need to replace) from y'all and I currently have them. They look exactly the same as the 39-187, but want to double check before I spray paint them, (as I need them in an alum ... (cont.)

Please help me find this window part - my casement window wont open and close properly - thanks

Hi, I have a harvey window & need a replacement for the window crank casement. The closest I could find was 39-187 & 39-188 but based on the measurements there seems to be a mismatch in the length (5" vs. < 4.5" on the present one that I have - please see picture - on the tape 20"-24.5") Co ... (cont.)