Viewing all customer Discussions for:

39-205 Truth Folding Crank Handle, 11/32"

Good evening, I am looking for a right and left Wright window crank similar to the attached pictures. The window crank has item # 07702 but the 8" arm has item #07909. Thank you for your help! Sergio M

I have a right swing and a left swing window crank (only one is shown in the picture) that I need to replace. The black part should have a white handle connected to the end (that is the part that broke). The width of the mounting flange portion (where all the holes are) is 3 5/8". Both arms are 4 ... (cont.)

Looks like the casement operator is fine, but the handle or crank itself needs to be replaced. Measurements are as follows: - the metal piece sticking up and out is 3/4 inches long - the crank itself is approx 4 inches long Does that help? -- Matthew

I would like help with replacing the pictured crank handle with a smaller profile T-handle ( I need 3) so vertical blinds don't stack on top of current crank handle when lowered. I don't know spline size. Also, the sleeve that goes behind the locking latch, several windows are missing these. ... (cont.)

I have a jeld-wen casement window that is missing both handles and covers. Can you please advise what parts would fit this. I would like a folding handle if possible.

The casement window pictured here and used in this house was built in 1957. I am pretty sure that the windows are Biltwell from Dubuque, Iowa. At least the hardware has that as a stamp identifying the hardware as such. The arm is over 14" in length.

Pictures are of the crank for Caradco awning windows marked with a part number(?) 45012. They are not the folding type and are held in by a setscrew. Can you suggest a replacement part?

window crank #39-205

Looking for folding handles that will fit our Tafco casement windows.Thanks,Jeff

I'm thinking this is your part called Entrygard dual arm operator product code 39-032. It's truth hardware. Short arm has 20810 and 30842R on it. It's 4 inches and 7/16 long. The long arm is about 10 3/4. Do I need the short arm bracket as well? My problem is the window cranks out but not in. T ... (cont.)

numbers 30842r U.S. patent 4.241.541 CAN patent 350.432 pat. 1982 Ineed a new mechanism with handle and plastic cover to hide the mechanism.

I have an operator with part number 0P06-7533-08 on it. I have seen similar operators on the website but not this one. Production numbers are 10-31-13 133886

To Whom it May Concern, We have a K & K casement window that was installed 30 years ago and we need to replace the operator. The only number on the operator that I found was 40471. Any help you can provide would be greatly appreciated. Thank you for your time. Sincerely, Joe

It is a Truth brand, and the # I believe identifies it is 30744 although the following #'s were also on there, 40574 and 45108. The long arm is 9.5" in length. The crank to open'close is in the middle. Do you have a replacement for this? Sincerely, Sheila

We have been trying to obtain these parts from the company that supplied them and were told by them that they couldn't help us. Sierra Pacific referred us to you. I have attached these pictures hoping you can help us get these parts to replaced as we are renting our house to someone and they are s ... (cont.)

Replacement part for Crystal Windows, wining handle part

I send you the picture number ref 7501320 PAT 5410778

I need replacement crank handles only.

Hello, My client recently moved into a home with K K Windows. I would like to order folding cranks for the windows, but when I researched K K Windows, I found the manufacturer is located in Ireland! Can you help me? Martha R., Interior Designer

Nami NFRC