Viewing all customer Discussions for:

39-217 Single Arm Window Crank

Operator slips off window and the gears are stripped for the handle , need new mechanism . Window is original to our house, b uilt in 2011. FIRST TIME DOING THIS type of job

I have a broken part

Trying to replace the assembly for a right and two left casement/window crank assemblies. I don't see any part numbers, but see "truth" on the arm and patent number 4,480,075.

I need 1 pair of balancers overall length of 22"; and 1 truth 9" long single arm coastal operator for a Left hinge casement; and 1 Milgard auto lock.

These windows were manufactured in Indonesia. I can not find part numbers or manufacturer other than on the crank handles, the numbers 22 and 15054. I need to replace several and would prefer to do it in stainless steel if possible. Can you identify and can you source this item?

Need two window crank operators and handles. Both windows open out to left when facing the windows inside the house (open to the right when facing windows outside of the house). Windows are MIL-027-4 Seris 6310. Don't need exact window crank operator, just something that fits and where the handles ... (cont.)

include casement guide approx. 11-1/2" long. also, need handle and screw crank

Semco Window was installed in 2002. Crank is on the right side when looking out. Appears to have a single straight arm about 9 inches long. Actual part has "Truth" name on the arm. Also need a white or beige crank handle.

I needed to pu ll the window apart to show you that my Vetter casement window has three arms. The longest one is the main arm and it is 9 and 1/2 inches long. The other two are 7 and 1/2 inches long and the third is 5 and 1/4 inches long. Do you have a replacement part that I can use?Thank you for y ... (cont.)

I am trying to find a replacement for one of my window operators what are the dimensions for this product?

Hi, We have very old casement windows and the handles are starting to break off. Inside the handle, it says 45054. Do I need to replace the entire mechanism? It looks like this one is more than just the handle. What do you recommend? Eva

the overall body width is 5". The overall arm length is 9 1/4", rivet to rivet is 8 1/2"

I believe this is a truth part. Say LH as can be seen in picture Also the arm has this number 501-11-3L

Grayco window will allow me to crank out window but not crank it back in. there also appears to be a broken piece of black plastic that keeps window in track seen in image 8993. I think the sticker says k501305-01 grayco 09-3294B then size 27 5/8 by 53 1/4 bar10822 egress. Hard to read sticker ... (cont.)

I have a Windsor crank window. The window does not crank close. I am looking to replace this part in provided pictures that is between the handle and the crank. It looks like a metal washer or "c clamp" is broken. Are you able to provide this part without replacing the entire crank? Thank You! ... (cont.)

see picture. part number stamped 30830

Have broken crank, the turn screw pops out when the crank is turned. I believe I need 39-217, window opens to the left, the single arm is roughly 8.5" long. I also have multiple cranks like this, would like to replace the front of them with 39-107FK, is this compatible?

These from an Eagle Window installed 19 years I was told sold to Andersen Windows ( although I have not been able to verify this). The picture is a right side crank from inside looking out. The broken one is left side looking out. The measurements are the same but afraid to open broken window. I n ... (cont.)

Hi - I'm looking to replace this part on couple of windows. Please advise on a replacement part that will work. Thanks, Patrick.

Looking for a replacement operator for my casement window