Viewing all customer Discussions for:

39-252 Crossly Window Crank

Bottom holes are 2 1/4 inches apart. The arm is 2 3/8 long Horizontal holes are 5 1/4 inches apart

Hi Team, I need some window operators to replace the part shown in the attached photos. Your help is greatly appreciated. Thanks! John

Need three right operators and one left operator for 45 year old windows. Want to buy one right initially to ensure fit and function. Arm length is 2-3/8" - not sure about thread dimension. C-C vertical length is 5-1/4". If colors are available, white is preferred. Only information on existing close ... (cont.)

I'm wondering about the new 39-025 arm link, it doesn't have the half moon cut out in the metal, it's solid. Will that interfere with the window closing? Sorry I'm a novice with repairs

I have to awning window operators that have stopped being able to close the windows; they handle just unscrews as seen in the dissasembled photo. Inside the operator (i think that is what the part that screws into the window on the inside is called) it says "RM JHL /L1". I was unable to find an ... (cont.)

I would like to replace three easement window hardware in brown. The windows were part of a Four Season Sunroom. The body measures five inches and screw holes are 5.5 " apart.Please identify this part so I may place an orderThank you,Morris

I've been trying to find a window crank so I can fully close my windows. Unfortunately, I don't see any part numbers, and the part I ordered from Amazon, is not the correct fit. Please help? Thanks!

The units have right and left side cranks the spread from top screw to bottom screws is 4-3/4" center to center the windows were from the late 1950's. Are any of your products a match?Thank you,Frank

Because I repair my own awning windows, a friend asked for help on theirs.I have not found any identifying information on the window or operator. She has a whole houseful of these. The pattern on the operator housing is unlike any that I find online. If you need any further details, please let me ... (cont.)

Hi all, Hoping to confirm a part number for 6 left hand replacements. Hole spacing is 1 1/8 x 5.25 with a 2 3/8 arm. Some of the arm attachments seem to be via c-clip and others by threaded grommet. Also looking for an extended or straight crank handle. One was installed in a corner beside a door ... (cont.)

Looking for a replacement for a number of operators in my old cabin. let me know if you have any questions, please. Picture 2250: Distance from Main lift arm operator body hinge pin to articulating small arm braded pivot = 2 5/8" Picture 2252- overall center/center of small arm pivot hole = 2 1/8" ... (cont.)

I need 5 of therse window cranks IH CO 790.

This is from a house that was build in 1925. The arm that comes out of the box does not protrude out of the box when fully close which makes it difficult to identify the correct window operator. From what I could measure, the arm that is connected by the screw is about 2 3/8 in length.The space betw ... (cont.)

need help identifying replacement.

NUMBERS STAMPED INSIDE OF CRANK HOUSING. PAT. NO. 198202 US 2 R.H. RD1963 CAN. STAMPING ON INSIDE OF HANDLE 11500-11

Hello, I am renovating a house down in Florida and am trying to make sure I get the correct parts for these window cranks which I would prefer to keep since they seem to work OK (though they have not been maintained). The link arm is 2 1/2" and the operator itself is 1 3/4" wide at the base and app ... (cont.)

-as shown in pictures: The part that moves with the handle) is shaped to curve facing up. My original handles all have that part curved to face down. When my original part is closed nothing sticks out. When the 39-026 closes there are gear teeth sticking out and because of this I just can not close ... (cont.)

I?m trying to repair an awning-style operator on my jalousie windows. The crank (pictured) keeps unscrewing from the operator when I try to close the windows, which makes me think I need to replace the screw itself, within the handle. If this is the case, can someone recommend the proper replacement ... (cont.)

need help finding this LEFT-HAND Awning Window Operator

I can't find this operator and was wondering if you could help me. I can get all the dimensions except for the arm length. It looks to be between 2 and 2¹/8 inches. I have no idea what manufacturer is. The House was built in 1967 I think they are the original windows. Thanks for the help in advance. ... (cont.)