Viewing all customer Discussions for:

39-504 SS 13-3/4" Channel Guide

Looking for replacement for pictured item

I am looking for replacement hardware--cranks and arms--for Andersen windows from the 1960s. This picture is not the original crank but one we were able to find about 10 years ago that works well with a bit of a gap on the sill.

Trying to find replacement parts casement window operator Truth #40065 & 40066. I measured length from end of crank to approximate center (9and a half inches.

I have casement windows that have broken cranks and one window with a broken opening mechanism. Here are the pictures of the mechanisms on the windows. I am hoping you can help lead me to a replacement. Measured from inside, the longer arm is approximately 5 inches and the shorter arm is about 2. ... (cont.)

Hello, Looking for some replacement roto operators for aluminum casements

I need to replace several cranks for some Anderson casement windows. Which replacement crank do I need to order? Is it the Stone 39-286 model? The home was built in 1971 and these are the original windows.

Good Morning, Hope you will able to find a match to replace our old window operator. Thank you Benny

My research has led me to 39-027E, and it's opposite, with new window channel things...as the closest I can get... I'll need 5 total, 4 right (I believe) and 1 left, with handles, and the channels for the window. Before I order, am I on the right track?

They're 3 holes and the track is parallel to the mounting.

part no. 7073b rours is stipped do you have a re-placement

I have a NVR 4500 series casement window from 2005. I purchased a new 9.5" operator window crank assembly but my old one doesn't have the plastic bushing on the pivot, it's steel. Then I looked at just purchasing a new track for the bottom of the window and I don't see anything like the one I have. ... (cont.)

I need a casement window track for my steel casement windows. The operator has a nub at the end that is approximately 5/8" diameter and about 1/8" thick. The distance from the mounting screws on the window are about 12-1/2" from each other.

I can't find any names or numbers on this hardware. The house was built in 1927. The mechanism attaches to the metal frame with two machine screws into a tab on the metal frame. It seems the previous owners tried to open or close the windows with too much force on the mechanism. They were painted sh ... (cont.)

I have a home full of 1960s' Andersen casements....I need new roto-gear operators... existing hdwr. has a number #7073A...base is 3 3/4" wide, screwholes are 31/8" wide arm lever is 7 1/2"......can you help? thank you, John

Thank you for reaching out to us. I was not able to cross reference an exact replacement operator. Is there any way we can have you reply back with some photos showing the hardware? We'd like to take a look and see what options we can come up with for you.

I'm trying to replace an operator arm from an Anderson window. Part number 7073B. See photos. Andersen wants $191 for one arm.

The stamp on the metal is 7168-20

Looking for a channel guide for my casement window. I saw your product code 39-504, but it was too short. Do you have any that are around 16" long? I have attached some pictures. thanks

I may need multiple right and left crank units.

Hi. Im looking for this small bracket from a casement window. Ive attached a couple of pics. The one with the part # is not off tje hinge, its from the long channel.