Viewing all customer Discussions for:

39-505 11-3/8" EntryGard Track, 4 Hole

Need to replace old caradco hardware to white. Double casement. looking to replace left and right locks and crank cover and handle to white. Is there a cover to go over existing crank and they both still work. Also looking to change screens over to white

The crank gear action and arms need replacing. Crank handle and cover is fine. Etchings on the arms of crank read "6D O16S AMS on arm that connects close to middle under window, and S-1081-66 R" on part that connects under hinge side. The arms work fine, but it looks integrated with the gear mechani ... (cont.)

Need guide for 39-032 and 39-031 that attaches to the window for opening the window 11-3/8" long

I need to replace my casement window assembly but can't find the right unit on your site. As you can see it has a small metallic wheel rather than the larger plastic wheel. I ordered the 39-031 back in august but it doesn't fit in the existing track. The replacement track, part number 39-505 will no ... (cont.)

See identifying numbers in photos attached

I need one left side opening and on right side opening.

Good afternoon I need to order parts of pictures attachedGeorge

Need replacement operator, guide, set of 10" concealed hinges for casement window measuring 34W x 46HMark

Hi, my name is samuel and I need 6 entrygard track for my widows, but the length of the track is perfect. But i do not understand what is 11/16 size for the little wheel. my wheel size is 1/2 plus so, would you explain me the 11/16 size? cuz i do not want it to be to big for the wheel. thank you ... (cont.)

I need a replacement for this Operator. It is a single arm 13.5 inch and it latches on the left. I think it is similar to your model 39-013 but I'm not sure. It has 4 screw holes and the distance between the two top holes is ~3 inches. The slide the window moves on has the number 30744 and on the ba ... (cont.)

Can I replace the bearing wheel instead of the entire single arm operator assembly? If so, questions: Is the pin threaded? What exactly would the replacement part be called? Do you stock these parts?

Looking for this part. There are no other markings on it. The handle says Row

Do you supply screws for Screws for 11-3_8-inch-Entrygard-Track/pd/Replacement-Window-Operator-Tracks/39-505? If not, what size to use?

If you see this part is under the bottom part of the window is the one I need thanks

I purchased 4 replacement operators 39-031 the wheel at the end of the arm are thicker on new operators is there a replacement track that will fit that wheel original track has #30175 on it. These are vinyl casements is mounted on bottom of surface not on the face

Need the track/ guides for newer replacements Also the pin that mounts on window sash for the short arm

I need a few LH and RH Caradco casement window operators. The length of the single arm is 14" and the roller is 7/8" diameter. Mine looks like your 39-013 and 39-014 but the arm is only 13.5" long. But that might work, what is the diameter of the end roller?

Trying to find replacement part for frozen/rusted casement window top hinge

Hi, I'm searching for a RH casement window operator crank. The window is a Windsor wood frame & house was built apprx 1980-81. Looks like the operator is a Truth. The extension arm measure 9 1/2 inches from pivot point to middle of roller. The crank body is 4 inches wide x 2 inches deep and screws a ... (cont.)

My client has a twin casement window where both the left and right hinges have rusted and broken off the window, both lower and upper sections of the sash. The operators are 39-155/156, the tracks are 39-505, and the stud brackets are 39-509/510 and seem to be fine. The hinge is Entry Gard 40887 fro ... (cont.)