Viewing all customer Discussions for:

40-150 Inside Handle, 1-3/4"

Replacement part, 1 3/4 mounting holes, polished brassThe spring inside broke, so the latch won't work. I need a replacement, brass if possible and don't need a full handle set. Thanks.

See pictures. Need inside latch and screws. Activated from outside by turn knob. 1 3/4" hole placement.

Lock was broken and we need a replacement.

I need to replace this screen door handle. The door measures 1.5 inches thick

I need to replace this inner latch. I purchased a replacement but it was the wrong size I purchased 40-150 inside handle 1-3/4" and 40-187L square spindle The spindle needs to be shorter and larger in diameter What items should I be looking at?

I need replacement for broken door latch Cmech

How do you remove the insert to accommodate the larger spindle?

Hi. I am looking for a replacement part for this door latch. The door is approx 1 1/2 inches thick. Please let me know if you have this replacement part and what is the cost .

Ordered 40-150 handle. Fits door but doesn't line up with latch. Please advise as to identify correct part number for this application. Thank you.

I trying to find a RAMCO 1-3/4" Screen door latch that clasp over the claving. Has no latch receiver.

Need to replace the inside latch only if possible. Would the 40-053 be a suitable replacement or would we need to replace the entire lock set with your 40-177? Important: Can the outside lever be reversed to face the hinges? Thanks in advance!

I would like to buy one of these. Can you please help.

Condo requires an exact match. Door is one inch thick. Everything else should be self explanatory.

Recently this jalousie door handle / lock broke after 37 years. I was pulling the inside lever in, as usual, and getting ready to slide the locking bar into position, when the inside lever pulled all the way off. I was able to get it back together enough to get it to 'kind of' work. I can get it to ... (cont.)

Looking for a replacement part for this door. Any info is appreciated!

My handle broke. I've bought every handle in town and none of them fit. I can't find the brand of door only the attached on the glass.

The closure on the inside does not latch all the time. Took apart and cleaned, oiled and is still inconsistent with closing. Replace?It's for a 1 1/2" thick screen door. Holes are 1 3/4" .Thank you,Peter

Hi...I have a Forever view storm door (see attached door1.JPG). The handle is about to fall off, and is so loose I can't open the door. I think the solution is to tighten the door handle, but I don't have the proper tool. I've tried allen wrenches...star wrench...but nothing I can find seems to fit ... (cont.)

We purchased an older home, which had a storm door installed. We do not know the manufacturer of the door, nor the handle. We are unable to remove it and provide you with a picture. The latch slides out and needs to be tightened to secure the door. It has an adjustment area that appears to need an m ... (cont.)

Hello, I am looking to replace a storm door handle. Do you have a replacement for this forever view storm door handle? Thank you, Heather