Viewing all customer Discussions for:

10-109 7/8" Flat Shower Door Wheel

Looking for replacement bottom track mirror sliding door guides

Then how am looking to replace my drawer Wheels for my Saint Charles kitchen but can't seem to find the wheels

Hello!I just placed an order for 2 of the1 1/8" roller for a drawer slide Below is a picture of The part I require.( the plastic on the roller has broken off) It is part of a 20" rail.image1.jpegCan you help me to identify the correct part?Many thanks!Lynn

See above

My kitchen has a set of metal Beauty Queen kitchen cabinets/drawers/double sink from, I believe, the 1950's. Evidently a number of the rollers for the drawers had broken before I lived there...there are a few 'replacement' wheels that have a metal body attached to them which impedes the drawers fro ... (cont.)

nylon; 29/32" diameter; 1/4" wide with a stub mount

Greetings I'm having the cabinet power coated and I will need 4 new rollers as the powder coating will melt the existing ones. It's an old Kohler Thanks

Looking for replacement rollers for bedroom mirrored sliding doors. Home built in late 1960's. Rollers are mounted to top of sliding door frame. Each roller is attached to the top of the window frame with two screws. Back of doors have no place to mount rollers (backs up to the glass mirror). ... (cont.)

I have a couple kitchen drawers with this type of slide. There is only one roller set per drawer that attaches to the front of the cabinet. The rollers are giving out; they are 7/8" in diameter; 1" would probably work. Either need to try to replace completely (not sure how), or try to replace bad ... (cont.)

The drawer rails are marked Vogt Industries. The 7/8" nylon roller cracked, and set free all of its ball bearings. Of course these cabinets were new some time in the 70's, which means the style of hardware is probably out of production. Just thought I would give you all a crack at it. And I don't se ... (cont.)

2.steelcase drawer nylon roller 23/32 in diameter by 21/64 wide shaft hole 9/32 with o ring

This house was built in the 1960's and I need to find new rollers. Do you have what I need? I guess I need a front-door roller and a back-door roller.

Looking to replace worn rails or wheels on metal kitchen cabinets.

Need to replace track and rollers on 2 bypass 4' mirror doors with no floor track. Appears the 23-247 door track will work but not sure which rollers since existing mounted on top and yours mount from side. Doors are 1" in width.

I need to replace the wheels on the top of my shower doors. There are 2 per door with 3 doors per shower, so need 6 wheels per shower. I have 2 showers so need 12 total wheels for replacement. I?d also like 12 wheels for back up, needing a total of 24 wheels. Hope that makes sense! Thank you! ... (cont.)

I'm looking for a flat edge roller for a glass shower door the roller needs to be 7/8"O.D. 1/4" wide with a 10/32"screw. I can find them with a 8/32" screw but that will not work the shower doors are 9'tall 3'wide 1/2"thick there are 4 on each of the two panels doors. Very heavy. On some of my rolle ... (cont.)

I don't see the rollers I need on your website. Would you please review the pictures of the hardware I need, to see if you can help me? I need to replace the roller hardware for my closet doors. Thanks, David

I apologize but I didn't record any size info on this part, but I think that's a pretty good picture. If other info is needed please let me know.

When I powder coated these drawers I misplaced one of the rollers. The 1 1/8'' will not work. They are rescued from a demo.

I am looking for Replacement ROLLER for Grant 24" drawer (on right side) measures 7/8", is on a flat plate that fits down into Slide OR something close enough to work, thanks! Jeff