Viewing all customer Discussions for:

15-118 Pivot Shoe, 9/16" Thick

Darn it. Looks like the pivot shoes I ordered are too thick. Does it look to you like I need the 1/2"? What I ordered was the 5/8". Don't want to keep ordering different sizes.

Hi - I'm looking to replace the pivot shoes in my vinyl windows. They are 9/16" thick, 1 1/4" wide and 2 1/4" tall. Can you identify the right ones? Thanks!

Need to order pivot shoes and spiral balances. I have identified the balances but a little unsure about the pivot shoe. There is a number stamped on one of the old ones 590C. Can you identify it by this? It appears to be 9/16 and the one I'm leaning toward is part number 15-118. Any expertise is app ... (cont.)

I have attached three shoe pics. Shoe dimensions: 9/16 x 1 1/4 x 2 1/4. What is the correct part number please? Cheers

please see pictures attached I am currently bidding a project in my area for a school district They have a lot of traco windows that have parts missing and broken can you assist in pricing for balancers, coil housing pivot parts and sash locks.. please price out per each and if there is any discou ... (cont.)

Hi, Several of the Spiral Balance Pivot Lock Shoes on two of my windows are cracking, falling apart and need to be replaced. The stickers on the windows are very faded but I was able to figure out that they were installed in 93 and 94... The Shoes themselves have the marking of 590C... I measured ... (cont.)

Hello! I have a set of old windows and am looking to replace the broken shoes. I was unable to find any numbers on them. Is there other information that would be helpful? Many thanks, Wellesley

I need 16 pivot shoes. Marked (550C). Two tilt bars. Marked (1463), (1440-1). And hopefully one sash corner connected. Marked (C 84 2). Some dimensions are on the five included photos. Am able to make some modifications to make things work. Thanks for any help!

1 1/4" wide 2" tall 9/16" depth The spiral spring is 24" long and encased in a aluminum sheath. They are in an aluminum thermal window.

Hello need the following: note this is for Marvin windows 2 of the pivot shoes part number is seen on one of the photos 2 spiral balance (see pictures) 28.5" long 2 tilt sashes ( see pictures) 2 replacement latches and replacement bases Thanks, Todd

this part is broken. it hold the spring. it is 2" long plus a small round at the bottom and 1 1/4 wide. I am not sure about the dip, if it is 9/16 or 17/32? Can you please let me know which one of your options I should buy?

I am ready to order a 29 inch spiral tip window balance. Part S600-29. My current windows have a black plastic part at the top of the balance. the balance is inserted into this black part and all held together with one screw. I dont see this part on your website. I have attached pictures. One i ... (cont.)

I ordered pivot shoes from you folks back in 6/10/2013 although I did not see them listed. I still have 12 of these remaining, see the picture below.I need a tilt latch for both left and right please see the picture below. Do you have a match

I am confused as to which one I need. I then overthink and then not sure. I will need a total of 14 and do not want to deal with an incorrect order. Thank you for your help

The picture I uploaded shows my window shoe and twist balance, I'm looking for help to make sure I order the correct replacement parts. The balance diameter is 3/8 and I have 2 lengths in my windows 25" and 29". The tips of the balances are white, however when I try to select a balance that is 2 ... (cont.)

Current pivot shoe is 9/16" thick 1 1/4" wide. Can't tell if the length is 2 1/8" or 2 1/16" Looks like part number 15-121 or 15-118 Does it matter if I get either? Thanks.

Looking for this part. 1-1/4" wide. I ordered a smaller one that doesn't fit. Thank you.

Blue Tip 26 e3/16 long, 1/2 diameter Thanks

For Traco tilt sash metal window frame. The shoe goes with a Series 85 tilt balance. I am trying to find the correct replacement shoe.

Has become VERY hard to either raise or lower. Marked as 550C. Size is 2.272 H 1.250 W and. .555 D. Has cut some plastic strings where shoe brake pressed,but are minor & should not be a problem. In 1994 manufacture home.