Viewing all customer Discussions for:

58-105 Gray Pile Weatherstrip, 9/32" x 11/32"

Which of your gray pile weather stripping do I need to satisfy my requirement of decimal dimensions .270 back x .260 pile height? Your fractional dimensions 1/4" could go either way at .230 or .260

Hello, I received our order for item 58-099 but the pile of 5/16" is far too short to fill the gap in the door I'm replacing the old pile for. The 9/32" width of the base is perfect but I need a taller pile length. I have a small piece of pile from another door in our building where the hei ... (cont.)

Good Afternoon! We are looking to replace the weather stripping to our Church Doors and need help looking for the right size of stripping. I have submitted pictures, both doors i've noticed have different measurements. Please help

We need to replace window gaskets on 1960s era sliding door frames. The material appears to be plastic or hard rubber. The gasket fits over an aluminum channel on the door frame, and snaps into place. SIZE 1/4" base, 3/16" sides. (door frames are appx 8') Thanks, Mark

The strip is 15/16" wide & approx 3/8" high The length is 7' Material: Aluminum and Pile

I have custom (painted) steel doors and frames on my modern house. I have wool weather stripping that I think is your 58-099 or 58-105. It was apparently glued on, and does not sit in a track. Should I remove the old stuff with a putty knife? What sort of adhesive do you recommend to attach new ... (cont.)

Hi Swisco. Here are some photos of the weather stripping I need. 1/4 inch for the slot and as you can see by the photos the part that goes toward the door is 3/8" and there is a plastic divider in between the two sides. Hopefully you have it. I don't care what color it is. Either gray, black or whit ... (cont.)

I need Gray Wool Pile, 9/32" x 3/8". I can't find it in your online listing.

i am not sure if I am overlooking it but I can not see how long is this weather strip for price paid

Hi, I took the measurements for my patio door, the wool pile is 9/16 x 5/32. I checked at your website, you only have the one with the fin seal. I would like to know if you carry the one without the fin? The wool pile on the bottom is 9/32 x .365 ( I measured with the Calliper). The base thic ... (cont.)

Which one do I need to order

3/8 slot X 3/8 wool pile (two) 5/16 slot X 1/2 wool pile (one) the above mentioned, need for three exterior double doors

looks like a 3/16" slpine and a 7/16 or 3/8" brush. It went on an Andersen screen door.

Paul, I googled Kinco and found that you sell some parts for their windows now that they are defunct. I have two drop-down windows nominally 20" x 36" for a total of 40" x 72". Not sure if drop-down is the correct term. Anyway the windows are designed to be used to pass through plates and dishes o ... (cont.)

I'm looking for weatherseal for a window that was originally installed in 1985, identified in client's original quote from contractor as a Harvey unit. Configuration is picture window with awning below. Need weatherseal for awning window. PDF is enclosed. I have had only moderate success with Har ... (cont.)

WHICH TO USE? PILE? BUBBLE SEAL? HOW DO YOU KNOW THE CORRECT SIZE WHEN THE FIN IS FLEXIBLE, NOT A RIGID PLASTIC? WINDOWS ARE NEW AND WE CAN SEE DAYLIGHT THRU THE WEATHERSTRIPPING. ADJUSTING WINDOWS / TIGHTENING WINDOWS ARE NOT AN OPTION. THANKS FOR YOUR HELP!