Viewing all customer Discussions for:

58-127 Pile Weatherstripping, 3/16" x 1/4"

Looking for parts show above. The window was installed 2009

I am looking for the bottom window seal of a Certainteed Bryn Mawr II window circa 2007 manufactured by MI windows in PA They slide in a track just like the pile weatherstrip (58-127). They move in the slot - but the window is not removable - I don't know how I can get to the edge to slide a new ... (cont.)

Hi, I'd like to replace the weatherstripping in my Simonton windows. The home was built in 1998 and we purchased it at foreclosure in 2003, so it's in bad shape. I've attached photos and am hoping you can make a recommendation. The bulb weatherstripping is about 7/16 in diameter. I'll send pics of ... (cont.)

Hello,I need to buy the replacement weatherstripping brush of my patio door, the measurements of the door is 37 inches in width and 79 inches in height, the total is 236 inches, my home was built in 1999, I attached some pictures so you have an idea what I looking for. I tried to measure the T slo ... (cont.)

The patio two panel frame assembly was made by Caradco and installed in 1989. The door measurements are: 6'5 1/2" x 3' Pile 1/4"x 1/4" - puffy part weatherstripping 5/16" - hopefully the ruler helps with the other measurements. Thank you

Hello, please see the attached pictures, I need replacements for these parts. The upper coil housing has two coils in it and has '11' marked on it. If you have these parts, please let me know the price and availability. Also, do you also sell the seals for these windows? They are of the "T" type, wi ... (cont.)

Looking to buy tilt latches, balance assembly, locks, and weather stripping for Simonton window. Picture contained window sticker. Thank you!

4 rolls enough for 7 windows Have pictures.

0D8W0000 - Pella Sliding Door Screen Weatherstirp Package. do you have this kit available?

Hello, recently decided to take on the broken windows in the house and the more I look the worse it gets lol. Window MFR. Kinco, LTD-JAX, FL. Series: Mark 40/50 STD H-LC30-53x78 H-LC30-48X95 Markings stamped on balance 29 4 of BSI Was able to locate the top sash guide and it worked great, but the ... (cont.)

Hi, I would like to replace Certainteed windows weather strip. Can you please help me to find the correct part? Attached are the images of current weather strip Let me know your best price.

I need to identify correct Window Weather Pile stripping for my Vinal Windows. The pictures are attached, The pile is full of dirt and dust and seems matted down.Also I need advice how to remove the pile from these channels they seem imbedded. Do I need to cut out one side so I can pull out with nee ... (cont.)

Hello, I'm looking for a few window parts and il do my best to explain what I need. I can't find any manufacturer name on the windows anywhere but it's a manufactured home from 1999 and the windows are original. I'm looking for tensioner or extension springs that help support the weight of lower w ... (cont.)

Hello. I will be replacing the pile weather stripping on windows. I'm confident I have the right pile (58-127) for my Nuair single hung windows . It's fairly simple to remove the old pile from the sash side, but I'm not sure how to do it for the pile that's installed on the window frame side. There ... (cont.)

Pella 8' tall sliding door unit. I'm looking for the insulation that slides in the groove on the sliding door of the unit. This protects wind and rain from blowing in when the unit is closed .

I have Florida Extruded windows in Bellini of Miromar Lakes. Balance stamp is 22E. Length 23". I confirmed top is 19-005 and believe bottom is 15-005 but the actual measurement is 7/8ths, not 1". No photos for this question. 1. Do you sell these screen spacers Approx large leg 3/8", next mea ... (cont.)

Looking to replace single hung weather strip on certainteed windows. Will need to buy enough to do more than 20 windows.

Require for Crystal Double Hung Vinyl Windows. 1) Spiral Balancing Spring: 25"X3/8" (RED) 2) Weather Strip (side of window): 1/4" X 1/4" 3) Weather Strip: (Top and Bottom of window) 1/4 X 3 /16"

I have KVW sliding windows from Kolbe that I need replacements for and the dimensions look to be 1/4 x1/4 with the plastic backing being 3/16 wide Any chance you have a replacement product?

Hello- Looking forward for your help! Thank you, Jayne