Viewing all customer Discussions for:

58-127 Pile Weatherstripping, 3/16" x 1/4"

I'm looking for pile weather stripping to repair a few windows. I wasn't able to find the manufacture of window so I need some help to figure out what product will work. The pile is 1/4" tall (image 3). The width of the stripping is 3/16" (image 1 & 2).

These are from a aluminum window they slide on the bottom of window and the other one slides at the top. They are pretty warned down I'm not sure what the original height is . All send another request with pictures of the other 2 wool pile that go on each side of the window their height is not a ... (cont.)

Can you tell me if you have the correct product to replace the pile weatherstripping for Pella Sliding Glass door? The doors were installed in 2018. Thank you!

Hello. Our farmhouse has Mastic double pane windows. These windows are no longer in production. I would like to purchase replacement pile weather stripping seals for some of the windows. I believe I need 3/16"x1/4" (https://www.swisco.com/White-Wool-Pile-3_16-inch-x-1_4-inch/pd/Wool-Pile/58-127). ... (cont.)

Is this weatherstrip a peel and stick type

Was able to find most of my parts easily, with 2 exceptions: 1. Plastic clips on the top of (left-right) slider windows 2. Wool pile weather-stripping, measures 3/16" (width) x 1/4" (pile) in gray 2a. product code 58-127 is the proper dimension, but wrong color 2b. pictured are two different ... (cont.)

certainteed double hung vinyl windows installed 1999

Hello, Do you have 1/16" Size? (See attached image) Thank you!

The ribbons are 25+ years old and very worn. The width is 3/16". The best preserved ribbon is 5/32" high. Running down the base of the ribbon are two parallel dashed lines. The base is white. The fuzz is gray. I cannot find any marks on the frames.

I would like some help in identifying these windows for parts needed, particularly weather-stripping. They are Double hung vinyl, approx 10 years old. I heard they may be Ecoshield by Kasson and Keller, but not finding parts for these windows.

Just wanted to confirm that the replacement weather-stripping I need for the side of my sliding patio doors is your "PILE WEATHERSTRIPPING, 3/16" X 1/4". Product Code: 58-127".Also, would you happen to know the replacement for the long piece that snaps into the side of the door and holds the weathe ... (cont.)

The pile insulation on my doors need to be replaced. When I measure the insulation it looks like 2/16 inch wide. Do you have pile insulation 2/16 in wide? The doors are over 20 years old.

We have a TRACO TR-8100 sliding glass balcony door. Can you tell me the number of weather stripping (the felt pile) pieces I can replace and sizes ? I'm going to be removing door to replace rollers and figured it would be good time to put new weather stripping in too

need to know which type is the replacement for the picture. its 1/4" backing, slide in.

Need the parts in the picture

We recently purchased a house with single-hung, single-pane, Alenco aluminum windows that have no visible number and need to replace the white vinyl glazing beads, weatherstripping on the bottom sash, and some of the channel balances. In order to remove the sash, it appears a part above has to be un ... (cont.)

Hello pictures is pile weatherstripping with 2 plastic sleeves on the inside do you carry this type ? Thank you. Tim

I am looking for these parts... Need 6 of each The last three pictures are the same part that holds the metal locking mechanism. The first two pictures are the same part, connected to the window and hold the "knobs" on the metal locking mechanism. Thanks for your assistance. Greg ... (cont.)

Replacement windowstripping: The tag on my window says Arci company. 39 3/4 x 45 1/2 white D/H conc Hdw, classic white, Low E argon DS, expander, white, 1/2 can, white. To me it looks like a 3/16 inch wide, the fan appears to be 1/4 inch tall.

I have certainteed vinyl windows and the weather stripping has the plastic strip (fin seal) in the center of the pile. Flattened out the pile measures about 1/2 in and the strip opening that the weather strip slides into is about 1/4 in (maybe a little less.) Can you tell me what to order??ThanksJim ... (cont.)