Viewing all customer Discussions for:

70-009 5 Pack, Screen Plunger Pin Latches, 5/32"

How do I determine how many of these pins I need for each screen I'm building?

Hi, I want to replace the nylon plunger pin on my Integrity screens with a metal type. The measurement is 1 1/2" long. The shaft is 5/32" diameter near the head, 3/32" diameter at the narrow part of the shaft and steps up to 1/8" diameter where it inserts into window channel. what would be ... (cont.)

The pin fell out and I can,t find it.I need a few replacements and instructions on how to install.

Can you please tell me what material your plunger pins and springs are made out of? The ones we have not are corroded so bad they do not move.

Several of the pins, knobs and springs for the screens on our MW windows have been lost over a period of about 15 years usage. Would like to buy some replacement pins.

hi. how do i remove my screen frame with the 70-009 pins?thanks.

Marvin windows - Sreen (spring latch pin The sash insert is 1/8" diameter, 3/8" long. overall length including cap is 1 5/8 two piece plastic with spring edged of screen is 3/4" wide Looking for a replacement made of metal component if possible. Plastic was not durable enough for the applic ... (cont.)

Good morning. I have an issue getting replacement pins for the screens on my Marvin double hung windows. Last June, I purchased Item #70-009 - but they were too thin and they allowed the screen to move around in the window. In May, I purchased item #70-008 - but the pin head was too l ... (cont.)

Integrity Screen Pin Replacement markings on window: IGCC CBA, IGMAC CIG-1, 3-98 I purchased part 70-219 but those didn't work. Thanks

Sir or Madam: I would like to replace all the plunger pins in my window screens with something of quality as the current pins seem to break as soon as you use them. The white plastic handles become brittle and break and the spring mechanism seems to fail easily as well. Attached are some photo ... (cont.)

Total length: 1 1/2 in. Length from bottom of cap to pin tip: 1 3/8 in. Pin tip dia.: 1/8 in. Cap OD: 5/16 in. Cap is nylon Pin is aluminum Spring loaded 14 windows with two pins each All are old and falling apart when screen is removed for cleaning.

I have a marvin ultra window, the screen has two pins that you pull to remove the screen. how can I figure out what number these pins are in order to order more ? The pins are plastic, clear.

Hi, I'm replacing some old plunger pins on window screens that would use the 5/32" plunger pin (70-009). The caps on the old screens are white/clear. It looks like the caps on the ones you sell are black. Is it possible to get the plastic caps in white or clear? Thanks.

Metal plunger: 5/32 and the thinner side is 1/8 pretty sure I need the 70-009 Plastic Pin: 5/32 and the thinner side is 1/8. Do not see this on your site. Thinner side of plastic pin is ribbed.

What is the length of the pin-and-cap assembly?

My house has about 16 casement windows and screens with really cheap plastic retainer pins that seem to break if you look at them wrong. Forget trying to remove them for cleaning. Can you help me identify what I need? I have no idea as to the original manufacturer of the windows or screens, as we ... (cont.)

I've attached photos of top rail screen pin, plunger and spring assembly, and screen mounting receptacle. Are these parts you can get, or do you have something similar? Steve

Needing to acquire replacement part to rebuild my window screens. Believe the screen frames to be 3/8" x 3/4" roll formed outside flanged screen frame, Bayfrom part BARB38L. The plastic corners are marked with BAYFORM on one ear and the following on the other, DP307078 RD63647, with the markings o ... (cont.)

I need to replace a few of the pins that hold my screens in place. The ones that came with the screens are plastic, but I don't require that the replacement ones be the same material. I don't want to have to drill a hole in my window frame, because there is already a piece of hardware installed in ... (cont.)

On your page labeled "Screen and Storm Panel Replacement Hardware", under the sub heading "pins" your picture shows a plastic clip that may be a part that I am looking for. Do you sell these and if so, at what price? Thank you, Sue