Viewing all customer Discussions for:

70-009 5 Pack, Screen Plunger Pin Latches, 5/32"

We are looking to replace the pins in our integrity screens. They are plastic with a spring. The screens are about 16 years old. If you need more information please contact the e-mail below or call 802 584 4470 thanks don d

overall length of spring pin is 1 3/8 inches made of grey metal with light brown plastic tip. The head of the pin that inserts into frame measures approx. 3/16". The house was built in 1990-1992 so screens are from that time period.

I need to replace a missing plunger pin on a screen. The screens were installed with Marvin windows in 1997, no other identifying information. I am sending photos of the existing pin on same screen w/ a measuring tape to show size. (FYI - the tape measure is laid across the top of the screen frame ... (cont.)

I am trying to identify a plunger pin for a full screen window. I believe the 5/32 is the correct one. It is for a Weather Shield window screen. Is there any other measurement I would need to take?

The screen has never been removed/ It now needs to be rescreened and I am unable to tell how to remove it from the door frame There are only 2 pegs from the screen into the door frame and the do not turn or appear to retract. What are they supposed to do? The door is in great shape except f ... (cont.)

I am looking for replacement parts for double hung peachtree window screens. The two plastic side clips and the two metal pegs on top of the screen. pThanks

Good Morning, Could you tell me if you have the below product or similar, but with a length of 5cm (Aprox.2 Inches)to replace my originals of which date back to 1999. Plunger Pin Latches, 5/32" Product Code: 70-009 Thanks you/Best Regards, Gerry

When I removed a window screen in order to replace the screening, the plunger springs were damaged. How do I replace them, and are there different sizes. If there are, how do I determine what size I must get for replacements? Thanks, Richard

Do you have a version of 70-195 that is a little longer? And a version of 70-009 with a white head?

I have peachtree windows and screens on the house. My screen use the small plastic latches similar to 70-208 and two metal posts on the top of the screen to hold the screen in place. Several of the metal posts are gone, are there specific replacement posts or would you just use a thick poprivet to ... (cont.)

Hi, I need replacement pins that hold the window screen in the window. It has a 1/2" spring around a 1/8" dia. pin that is approximately 1" long. There is a plastic cap on one end (approximately 3/8" long, with a flange head, on the screen side) and a metal cap (approximately 1/2" long) on th ... (cont.)

Hi, almost all of my screen are missing pins at this point. I would like to replace them and just want to be sure I am getting the right ones. I've attached two photos, can you please advise me? Thanks for the help!

Do you sell screen clips. See picture. The clips are spring loaded and they attach the screen to the top of the window. By pulling down on the clip it releases the screen for removal. There are 2 clips per screen. They are about 1 3/4" long. If you have them are they easy to replace? I need 4. T ... (cont.)

Please see attached 3 images and advise if you have anything that would replace the push pin on the screen. The screens are from Kolbe and Kolbe and are almost 20 years old.

I have the 70-009, and after watching the video to replace these I still have a question. should the fat end of the pin fit into the drill hole of the screen; or should it stop at the screen edge?

I have Marvin Windows/Screens at my house. I need replacement pins for my screens. Do you know if part #70-008 or 70-009 will fit Marvin screens? The screens have plunger pin latches similar to these part numbers. Thanks.

i have weathershield windows with removeable screens installed in new construction in 2005. looking to replace broken black pin that secures the screen in place.pin is approx 1"in length and attaches to the window and screen on a fixed metal pin. not sure if it would be considered a pin or a clip bu ... (cont.)

Trying to find replacement screen corners for my better bilt windows. I have searched and called several companies with no luck. My frame color is sandstone. Let me know if you can help, thanks again, Dan.

My metal pins are 3/16" Dia. at the large end. The central portion is 1/8" Dia. and the end that the plastic snaps on is 3/32" Dia. x 11/32" lg. The overall length of the pin is 1 11/32" with the shank portion being 1" lg. The 3/16" Dia. portion is then, obviously, 11/32" lg. The screen frames are ... (cont.)

Hi- I need to replace a few pins for my window screens (windows are Marvin Infinity). The current pins are plastic with springs inside. Dimensions are as follows: Screen frame width: 3/4" Hole diameter: 5/32" Diameter of pin at hole: 1/8" Diameter of pin head: 5/16" Length of pin from ... (cont.)