Viewing all customer Discussions for:

70-014 Turn Clip, 1/16" offset

Hello, My screen clip looks a lot like the 70-014 but the stem of mine is longer. Will this work?

Item #1 - Regarding the turn clip for my casement window screens. I order the 1/16" item #70-014 however they are a little to thick, do you have a thinner one same size? Item #2 - Regarding the window locks I need four locks and striker plate or just striker plate 2-1/2"long, mounting holes 2-1/8 ... (cont.)

I have a casement window with Del Mar Hardware, I need new crank handles and one locking lever. is the spine size consistent across all Del Mar windows? Also, I have 2 other casements with Truth hardware that need new crank handles, are the spine sizes consistent across Truth hardware? The enclosed ... (cont.)

On the screen top as shown in the picture, there is a clip that cling to the edge to hold the screen which is currently broken. Is that replaceable? If it is, can you help me to identify the part name and number? Thanks, Amy

I need to replace the lock on both sides of the windows as well as the screen locks. See the picture attach.

Can you please help us identify the below screen clips? Thank you

Looking to replace these clips. I'm not very handy. Will need 75 of them.

Turn Clip, item 70-014. How thick is it? What size screw do you recommend using with this clip? Thank-you.

Each screen has 2 latches at the top to hold screen in place in the frame. They appear to be riveted and definitely not screwed in.

I am replacing broken turn clips(number 70-014 )but how do I remove the broken ones that are on the screen. Also What additional items do I need to purchase to install them Thank you

I'm hoping like crazy that you can help me. I've searched high and low for a screen clip/keeper like the ones I've included. My home is 12 years old and my vinyl windows have no distinguishing markings for a manufacturer or serial numbers. These clips push into a hole at the top of the screen and tu ... (cont.)

There are no markings on the bay window which was installed 1995. It's not an Anderson. There are 4 of these clips on each window. All but this one are broken. They are not held in my screws as you can see. I haven't tried to pop one out; maybe that's how they are held in?

the corners of my screen are broken, are you the maker of these if so how can I order them. Your hardware is in this window and it's the only identifiable name I can find

Product code 70-014 looks like what i need except i need a 5/16" offset. I have attached pictures of the old turn clip. I can't find any markings on the window or screen to help identify the manufacturer. Thank you in advance for your help.

All of the windows in my kitchen have broken hardware, and as a result, I cannot open any of them. They are all casement windows with crank hardware and plastic latches. In two cases, the crank operators are broken and in one case the locking latch is broken. I have contacted a few handymen to se ... (cont.)

This small plastic part is used to retain screens in the frame. The screen frame rides over the raised section and is held in place.

Hello I wanted to find out how wide the turn clip is part number on your website is 70 – 014 into the description picture it shows the length as 1 1/4" and from the whole 5/8" but not the actual width. Thanks, Jason

I like the idea of using the acorn clips to hold my screens in. I need to install the screens on the second floor from inside the house. Can I use them on the interior side of the screen? If not, what do you recommend? -pb

I just moved into this condo and I have Acorn windows and screens. I have to replace 4 tilt window latches (2R/2L) and I have to replace 8 swivel locks for the screens. On the window frame is IGCC-362CBA-B-K Can you supply the needed parts? Thank you

I believe I have Jordan double hung windows in my house, and all of the screen clips are breaking. I have attached 3 pictures of what I am looking for. Thanks Frank B.