Viewing all customer Discussions for:

70-128 Screen Panel Pull, White

These photos are the screen panel puller on my screens. Most are so brittle they have broken. I saw nothing on your website like these so I don't have much hope you have them. But, I thought I'd try.

Need corner tabs , pulls, and middle brace atrachement clips

The plastic handle pulls on the Pella screen are about 20 years old and several of them are starting to break when installing the screens. Over the years I guess the sunlight is drying them out. Are there replacemnets available ?

Not sure what brand these screen are but I would like to make my own replacements. Do you have the parts I need?

Hi, I'm looking for screen tabs for a Milgard Montecito Garden Window MI0886CA, installed in 2016. Milgard referred me to you. Wondering if you might have these parts?

Hi I broke a screen window part, the rest of the screen stays in place, but I'm not sure what to replace.

Need replacement corners. 1 photo has LACTIVE CO and 718-522-0361 on interior. Only 1 pic shows the remnants of thin corner pull plastic

I am considering purchasing replacement product, because the pull tab on the screen attached to the Milgard window glass broke as shown in the photo. The tab I have now is made of metal, but there are two types, plastic Product Code: 70-128 and metal Product Code: 70-018. Which one is more durable? ... (cont.)

I have a Milgard single hung (aluminum?) window with a broken channel balance (white cable is snapped). The channel balances have the code "23 5 CW CWC 9".Is that enough info to identify the replacements?The sash itself is approx 46x26, so pretty heavy.I also found a small broken black plastic piece ... (cont.)

I have 15 year old Pella screens - and the pull has broken off on several

My window screen connectors are broken. Do you have similar connectors? I bought connectors from Home Depot and Aces (5/16), they do not fit.

Looking for a replacement for this. Thank you. Aluminum frame screen

894 screen corners with pull.

Good afternoon! Could you help with identifying the type of frame and corner to it? I can't find anything anywhere. I would be very grateful

Looking for window screen frame corners for an odd size frame tubing. the corners are square (not mitered) 3/4" between corner edge and frame start. "Standard" 5/16" corners do not fit, they are too large to fit into the frame tubing. Window owner has no idea the manufacturer of the window/screen ... (cont.)

The plastic corners in my white aluminum frames are 1" square with 9/16" or 5/8" tabs that push into the frame. I'm reluctant to take the the frame apart without repair parts. Is this enough information to identify the corners and the pull tabs?z

I have PGT double Hung WinGard windows with full screens installed in my house in Florida. The clear plastic pull Tab for the screen has broken. The windows/screens are 3 years old. I was hoping that you could send me a few Screen clear plastic pull tabs. Let me know if you need anymore information. ... (cont.)

I need your help. I've twice ordered these window screen corners, and have ordered wrong each time. I'm sending a couple pics of the broken ones I have, with what I just received below it in the pic. I need 8 of these in total. I appreciate your help in advance. My previous order 95-223 is too ... (cont.)

Please see the attached pictures. Do you have a pull tab with the stop on in at the corner? If you do and have these in a blue white, I am ready to purchase right now. I would be looking at purchasing 5,000 of each of the corners and the corner springs. No. (Suggested 95-186 and 95-218.) If ... (cont.)

I need screen latch finger #200-607B-021 , need screen latch handle #200-607A-021 , need screen panel pull . Does this match to your 70-211 and 70-128 ? Also what's the difference between the 26-393B and 26-393A , tilt latch pair ? Does this work for my window? All parts white in color. Thanks. ... (cont.)